Publicité
OP 1622BL
DESCRIPTION
- loosening torque: 1600Nm
- max. tightening torque: 880Nm
- speed: 8,500 rpm
- connection: 1/4"
- Recommended hose diameter: 3/8" - 10mm
- supply pressure: 6.3bar
- consumption: 184l/min
- length: 159mm
- net weight: 1.8kg
- supplied with fitting
MAJOR SAFETY PRECAUTION
1. Use personal protective devices.
2. Designed for the work to be performed. Do not use oxygen, fuel or other packaging gases as energy.
3. Before performing any maintenance tasks, make sure to disconnect the compressed air line for
emergency cut-off and prevent accidental activation. It is recommended to install a valve in area.
4. Close to the pneumatic wrench. Use clean and dry air and follow the recommended tools.
5. Do not use solvents that may react when in contact with tool parts. Before operating the tool, ensure
that all parts are correctly positioned to ensure no leakage.
These values were obtained in the laboratory
where the product was tested at 90 psi.
Torque may vary due to load, lubrication
conditions, air pressure.
1/2" D. IMPACT WRENCH 1600Nm
Rotation
Position
direction
Reverse
Forward
Forward
Forward
Maximum
torque
(indicative
values*)
1
1660Nm
1
200Nm
2
1.000Nm
3
1660Nm
Publicité
