Publicité
ENGLISH
3. Choose 'Specify a location' and click 'Next'.
4. Choose the correct map on the floppy disk by clicking 'Browse'.
Click 'Open' if you have chosen the right location. Click 'Ok' (Driver
location; A:\ w in2000).
5. The driver will be found. Click 'Next'.
6. Windows will prompt the message 'Digital Signature not found'.
Click 'Yes'.
7. The driver for the Ethernet Adapter is now installed. Click 'Finish;
and reboot your PC.
4.4 Windows XP Installation
1. Power up the computer and start Windows 2000. After Windows
2000 has started, the 'New Hardware Found' dialog box appears,
as shown in the following screen shots. Click 'Next'.
2. Select 'Install from a list of specified location (Advanced)'. Click
'Next'.
3. Select 'Search for the best driver in these locations', Select only
'Include this location in the search', click 'Browse'. Select A:\winxp,
click 'Ok', and then 'Next'.
4. The driver will be found click 'Next'.
5. A hardware Installation notification message appears, click
'Continue Anyway'.
6. Click 'Finish'.
Publicité
