Environizer NATURAL COOL MOISTURE HCM-551 Mode D'emploi

All manuals and user guides at all-guides.com
IMPORTANT
SAFETY
INSTRUCTIONS
READ AND SAVE THESE SAFETY
INSTRUCTIONS BEFORE USING THIS
HUMIDIFIER
When using electrical appliances, basic
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Always place this humidifier on a firm, flat and level
surface. This humidifier may not work properly on an
uneven surface.
2. Place this humidifier in an area where it is not
accessible to children.
3. Do not place the humidifier near any heat sources
such as stoves, radiators, and heaters.
4. Before using the humidifier, check the power cord for
any signs of damage. If the cord is found to be
damaged, DO NOT USE and return the humidifier to
the manufacturer under the warranty agreement for
repair.
5. This appliance has a polarized plug (one blade is
wider than the other). To reduce the risk of shock,
this plug is intended to fit only one way in a polarized
outlet. If the plug does not fit securely in the outlet,
reverse the plug. If it still does not fit, contact a
qualified electrician. DO NOT attempt to defeat this
safety feature.
6. To disconnect the humidifier, first turn controls to the
OFF position, then grip the plug and pull it from the
wall outlet. Never pull by the cord.
7. A loose fit between the AC outlet (receptacle) and
plug may cause overheating and a distortion of the
plug. Contact a qualified electrician to replace loose
or worn outlet.
NATURAL COOL
MOISTURE™
HUMIDIFIER
HCM-551
(#63-1508)
8. The humidifier should always be unplugged and
emptied when not in operation or while being
serviced or cleaned.
9. Never tilt or attempt to move the humidifier while it is
operating or filled with water. UNPLUG the humidifier
before moving.
10. This humidifier requires regular cleaning. Refer to the
CLEANING instructions provided. Never clean the
humidifier in any manner other than as instructed in
this manual.
11. Turn the humidifier OFF if you notice moisture on the
inside of your windows. This condensation represents
a humidity level that is generally too high. For proper
humidity reading refer to your humidity display which
reflects the current room humidity.