Publicité
Liens rapides
AUTOMOTIVE PRODUCTS, INC.
SAFARI BAR ASSEMBLY
BARRA PARA PARRILLA SAFARI
MONTAGE DE LA BARRE PARE-
CHOCS SAFARI
30-0020
30-0025
MOUNT KIT
EQUIPO DE MONTAJE
JEU DE MONTAGE
30-1395
ITEM
QTY
1
1
SAFARI BAR ASSEMBLY (PURCHASED SEPARATELY)
2,3
2
BRACKET, PASSENGER (2) AND DRIVER (3)
4
2
SPACER TUBE
5
2
1/2-13 X 2.00" HEX HEAD BOLT
6
2
1/2" FLAT WASHER
7
2
1/2" LOCK WASHER
8
2
M10-1.25 X 50MM HEX HEAD BOLT
9
2
M10
FLAT WASHER
10
2
M10 LOCK WASHER
11
2
M8-1.25 X 30MM HEX HEAD BOLT
12
2
5/16" FLAT WASHER
13
2
5/16" LOCK WASHER
1
1
BARRA PARA PARRILLA SAFARI (SE COMPRA SEPARADO)
2,3
2
SOPORTE, ACOMPAÑANTE (2) Y EL CONDUCTOR (3)
4
2
TUBO SEPARADOR
5
2
PERNOS CON CABEZA HEXAGONAL DE 1/2-13 X 2,00"
6
2
ARANDELAS PLANAS SAE DE 1/2"
7
2
ARANDELAS DE PRESIÓN DE 1/2"
8
2
PERNOS CON CABEZA HEXAGONAL M10-1,25 X 50 MM
9
2
ARANDELAS PLANAS SAE DE M10
10
2
ARANDELAS DE PRESIÓN DE M10
11
2
PERNOS CON CABEZA HEXAGONAL M8-1,25 X 30 MM
12
2
ARANDELAS PLANAS SAE DE 5/16"
13
2
ARANDELAS DE PRESIÓN DE 5/16"
1
1
MONTAGE DE LA BARRE PARE-CHOCS SAFARI (ACHETE SEPAREMENT)
2,3
2
SUPPORTS, PASSAGER
4
2
TUBE D'ESPACEMENT
5
2
BOULON A TETE HEXAGONALE DE 1/2-13 X 2,00 PO
6
2
RONDELLE PLATE 1/2 PO
7
2
RONDELLE A FREIM DE 1/2 PO
8
2
BOULONS A TETE HEXAGONALE M10-1,25 X 50 MM
9
2
RONDELLE PLATE M10
10
2
RONDELLE A FREIM DE M10
11
2
BOULONS A TETE HEXAGONALE M8-1,25 X 30 MM
12
2
RONDELLE PLATE 5/16 PO
13
2
RONDELLE A FREIM DE 5/16 PO
Remove the contents from box and check for damage. Verify all parts are present. Read instructions completely
STEP 1.
before beginning.
Remove factory shield by removing six 8mm bolts. Shield will not be reinstalled.
STEP 2.
Remove factory 10mm bolts.
STEP 3.
.
Determine passenger and driver brackets.
STEP 4
Attach bracket using the supplied spacer tube, M10-1.25 x 50mm bolt, 3/8" flat washer and lock washer, M8-
STEP 5.
1.25 x 30mm bolt, and 5/16" flat washer and lock washer per side.
Attach Safari Bar to brackets using 1/2-13 x 2.00" hex head bolt, 1/2" flat washer and lock washer as shown.
STEP 6.
SEE FIGURE 4
Level and adjust Safari Bar as desired and tighten all fasteners. Recommended torque values are 45 Ft. Lbs. for
STEP 7.
10mm bolts, 64 Ft. Lbs. for 1/2" fasteners and 23 Ft. Lbs. for 8mm bolts.
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
APPLICATION: 2007 HYUNDAI SANTA FE
APLICACIÓN: HYUNDAI SANTA FE, MOD. 2007
APPLICATION: HYUNDAI SANTA FE 2007
1
CONTENTS -
CONTENIDO
(2)
ET CONDUCTEUR
SEE FIGURE 2.
.
2
- CONTENU
(3)
WO:
3
TOOLS -
HERRAMIENTA
3/4" WRENCH
17MM SOCKET
13MM SOCKET
12MM SOCKET
RATCHET
TORQUE WRENCH
LLAVE DE TUERCAS DE 3/4"
DADO DE 17MM
DADO DE 13MM
DADO DE 12MM
MANERAL
LLAVE DE TORQUE
CLE 3/4 PO
DOUILLE 17MM
DOUILLE 13MM
DOUILLE 12MM
CLIQUET
CLE DE COUPLE
SEE FIGURE 1.
SEE FIGURE 3.
75-0839 REVISION 7/18/07
4
- OUTILS
Publicité
Manuels Connexes pour Westin 30-0020
Sommaire des Matières pour Westin 30-0020
- Page 1 APLICACIÓN: HYUNDAI SANTA FE, MOD. 2007 APPLICATION: HYUNDAI SANTA FE 2007 AUTOMOTIVE PRODUCTS, INC. SAFARI BAR ASSEMBLY BARRA PARA PARRILLA SAFARI MONTAGE DE LA BARRE PARE- CHOCS SAFARI 30-0020 30-0025 MOUNT KIT EQUIPO DE MONTAJE JEU DE MONTAGE 30-1395 ITEM...
- Page 2 FINISH PROTECTION Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive wax, (e.g. Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish and open it to corrosion.
- Page 3 LADO DEL ACOMPAÑANTE FIGURE 4 CÔTÉ PASSAGER ILLUSTRÉ FIGURE 3 CÔTÉ PASSAGER ILLUSTRÉ Thank You for choosing Westin products Westin Automotive Products, Inc. For additional installation assistance please call 5200 N. Irwindale Ave. Suite 220 Irwindale, Ca. 91706 Customer service (800) 793-7846 or (507) 375-3559...