DRAPER TOOLS BUNKER 08238 Mode D'emploi

To make assembly easier we recommend having two
persons aid one another in assembly.
STEP 1: ATTACH CABINET HANDLE
• Position the cabinet handle over the holes on the cabinet.
• Attach with (4) M6 x 16mm bolts and tighten with
supplied hex key.
drapertools.com
Draper Tools Limited, Hursley Road, Chandler's Ford, Eastleigh, Hampshire. SO53 1YF UK.
61" / 72" Workbench Roller
Tool Cabinet, 15 Drawer
STEP 2: ATTACH BOTTLE OPENER
• Position the bottle opener over the holes on the cabinet.
• Attach with (2) M6 x 16mm bolts and tighten with supplied
hex key.
REMOVING AND REPLACING THE
DRAWERS
• Pull the drawer completely out.
• Press down the left tab and lift up the right tab.
• Pull drawer off slides.
• To reinstall the drawer, realign with the internal drawer slide and
push in until locked in place.
CASTOR MAINTENANCE
• Grease the castors annually using high-quality bearing grease.
CARE AND CLEANING
• Periodically the surfaces should be cleaned with a mild detergent
and water. Grease and oil can be removed with most standard
cleaning fluids. For safety, use a non-flammable cleaning fluid.
• Auto wax will preserves the storage unit's luster finish and
protects against scratches.
Stock No.
08238, 08241