Hillsdale Furniture 100378-100691 Assemblage Et Montage

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
HARDWARE LIST
(4) Counter Bolts 1/4" x 2-1/4"
A
(4) Allen Bolts 1/4" x 1"
B
(8) Spring Washers 1/4"
C
(12) Flat Washers 1/4"
D
(8) Hex Nuts 1/4"
E
(1) Allen Wrench
F
(1) Hex Wrench
G
PARTS LIST
(1) Headboard Panel
J
(2) Leg Extensions
K
(2) Adapter Plates
L
K
E
E
K
B
D
D
B
D
L
D C
STEP 3 - Figure 3 - Full Size Only
Attach each Adapter Plate (L) to each Bed Post (K) using 2 Long Allen Bolts (A), 2 Spring Washers (C), 2
Flat Washers (D) & 2 Hex Nuts (E) per each side. Tighten all bolts and nuts.
STEP 4 - Figure 4 - Full Size Only
Next, attach the Bed Frame (*Not Included) to each Adapter Plate (L) using 2 Short Allen Bolts (B) &, 2
Flat Washers (D) from the outside, also 2 Flat Washers (D), 2 Spring Washers (C) & 2 Hex Nuts (E) per
each inside. Tighten all bolts and nuts. The assembly is now complete.
CARE & MAINTENANCE: The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
All manuals and user guides at all-guides.com
KENDALL HEADBOARD PANEL
Model #100378-100691 (1290-490) Full/Queen Headboard
A
FIGURE 3
L
D
C
A
D C
A
Bed Frame
Not Included
FIGURE 4
As Shown In
Figures 2 & 4.
C
STEP 1 - Figure 1
E
Begin assembly by attaching each Leg Extension (K) to the bottom of
each post on the Duo Panel (J) by firmly fitting in place.
E
STEP 2 - Figure 2 - Queen Size Only
Next, attach the Bed Frame (*Not Included) to each Leg Extension (K)
using 2 Allen Bolts (A) from the backside, 2 Flat Washers (D), 2
Spring Washers (C) & 2 Hex Nuts (E) per each post. Tighten all bolts
using the Allen & Hex Wrenches (F & G) that have been provided.
The assembly is now complete.
B
FIGURE 1
K
FIGURE 2
E
E
C D E
G
J
J
A
C D
A
C D
K
Date: 10-29-08
F
K