PNH Pop Up FabGraphics Instructions

MADE IN CANADA
pnh.ca
FabGraphics Pop Up Media Wall – Instructions
HITDPFK22-T - HITDPFK22EC-T - HITDPFK23-T - HITDPFK23EC-T - HITDPFK32-T - HITDPFK32EC-T - HITDPFK33-T - HITDPFK33EC-T - HITDPFK33C-T - HITDPFK33CEC-T
HITDPFK43-T - HITDPFK43EC-T - HITDPFK43C-T - HITDPFK43CEC-T - HITDPFK44-T - HITDPFK44EC-T - HITDPFK53-T - HITDPFK53EC-T - HITDPFK54-T - HITDPFK54EC-T
HITDPFK63-T - HITDPFK63EC-T - HITDPFK64-T - HITDPFK64EC-T - HITDPFK73-T - HITDPFK73EC-T - HITDPFK83-T - HITDPFK83EC-T - HITDPFK84-T - HITDPFK84EC-T
MONTRÉAL
1985 Hymus Boulevard, Dorval, Québec, Canada H9P 1J8
TORONTO 380 Millway Drive, Concord, Ontario, Canada L4K 3V8
(A)
(B)
(C)
1. Lay pop-up on ground ( g. A-1)
and pull straight up to expand ( g. A-2)
2. Interlock steel hooks to hold frames
securely in place ( g. B)
3. Attach graphic to velcro perimeter ( g. C)
4. Attach end panel bracket to frame
using at-head screw ( g. D)
5. Wrap graphic around the end panel ( g. E)
6. To replace a steel hook, unscrew and remove nut
and X bracket. By leaving the screw intact, replace
the X bracket and re-tighten the nut ( g. F)
Applicable products
(D)
-1
A-2
(E)
(F)
514-683-3279
905-238-5552
1-888-808-3279