Télécharger Imprimer la page

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

"For ages 12+"
Thank you for purchasing the AFTERGLOW® AP.2 Wireless for
PlayStation®3!
Contents:
1 AFTERGLOW® AP.2 for PlayStation®3.
1 AFTERGLOW® Wireless Link USB Adapter
1 USB Charge Cable
1 Manual
Using the AFTERGLOW® AP.2:
1) The AFTERGLOW® AP.2 is designed to work with the Sony PlayStation®3 videogame system.
2) Your new AP.2 Wireless controller features an integrated rechargeable battery pack that should be fully
PlayStation®3 when it is powered on. Connect the mini-USB plug to your AP.2 controller. The indicator
Wireless Link USB Adapter into one of your PlayStation®3's USB ports while the system is powered on.
Press any button on your AP.2 controller and an automatic pairing will take place.
4) After pairing is complete your AP.2 controller will show it's controller number designation via one of 4
indicator LEDs. It is now ready to use. Time for some gaming!
soon to avoid interruption of play.
Changing AFTERGLOW® Modes:
AP.2 must be connected to a PlayStation®3 console to function.
2) The AFTERGLOW® button on the AP.2 is located near the controller indicator lights on the controller.
All manuals and user guides at all-guides.com
3) The AFTERGLOW® AP.2's default setting is "ON."
4) Press the AFTERGLOW® button once to change to "VIBRATION" mode. Lighting occurs in this mode when
the AP.2 rumble motors activate.
5) Press the AFTERGLOW® button once more to change to "OFF" mode. No lighting occurs in this mode.
6) Press the AFTERGLOW® button once more to return to "ON" mode.
7) Cycle through the three settings as often as you like and enjoy the AFTERGLOW® in your favorite mode!
Frequently Asked Questions
Can I charge my AP.2 controller before the battery is completely drained? -Yes, you can charge the AP.2 any
time you like. You will not damage the battery by charging when the battery still carries a charge.
Can I use my AP.2 controller while it is charging via USB? -Yes, you can play with the AP.2 and charge it at the
same time.
Can I use multiple AP.2 controllers with my PlayStation®3? -Yes, you can use up to 4 AP.2 controllers with your
PlayStation®3 provided your system has 4 USB ports available.
My AP.2 controller will not sync with the PlayStation®3. What can I do?
controller and a wireless link should be established. Make sure your PlayStation 3 is powered on and that
your AP.2 controller's battery has a charge.
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Consult the dealer or an experienced radio/TV technician for help.
FCC ID for Controller: X5B-PL6422
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15
of the FCC RF Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired operation.
© 2011 Performance Designed Products LLC. All rights reserved. PDP is a trademark, and AFTERGLOW is a registered trademark, of Performance Designed Products
LLC. PlayStation®3 is a registered trademark of Sony Computer Entertainment, Inc. This product is not designed, manufactured, sponsored or endorsed by Sony
Computer Entertainment.
AFTERGLOW® AP.2
CAUTION
FCC ID for Dongle: X5B-PL6422A
2 year limited warranty. See www.pdp.com for details.
*please keep this information for future reference
1840 East 27th Street
Vernon, CA 90058 USA
For technical questions please visit
www.pdp.com or call: 1-800-331-3844 (USA ONLY)
For PlayStation®3
For:
®
PL-6422
CBX II - 382-390 Midsummer Blvd.,
Milton Keynes, Buckinghamshire MK9 2RG UK

Publicité

loading

Sommaire des Matières pour Afterglow AP.2

  • Page 1 You will not damage the battery by charging when the battery still carries a charge. Can I use my AP.2 controller while it is charging via USB? -Yes, you can play with the AP.2 and charge it at the same time.
  • Page 2 à tout moment. La batterie ne sera pas endommagée si vous la rechargez alors qu’elle n’est pas déchargée. Est-ce que je peux utiliser ma manette AP.2 pendant qu’elle se recharge par le port USB? -Oui, vous pouvez jouer avec l’AP.2 et la recharger en même temps.

Ce manuel est également adapté pour:

Pl-6422