Konect K1 ELITE KN-K11901001 Notice

Features
➤ The new and unique stator design of K1 ELITE motor is optimised to provide strong torque and high RPM.
➤ Updating the cover and installing the vacancy avoidance space is suitable for all modi ed car body in the market.
➤ New stator coating for better heat dissipation and long term surface corrosion resistance.
➤ Accurately mounted sensors for the best possible KV and RPM.
➤ CNC Machined Billet T6 Aluminum Heatsink Can
➤ High Purity Copper Windings Maximizes Conductivity
➤ Adjustable Timing, Dual sensor port
The product structure
A. First of all loosen the three screws on the back of the motor
B. Turn the timing sensor cover and adjust the position
C. Tighten the three screws well
- Increase the timing, motor temperature is getting higher, battery shorten its running time
- Adjust motor timing consultation with experts necesseraly
- Timing adjustement requires ne-tuning, lease adjust timing carefully
If your sensor cover screw tighten loosely, due to vibration or some shock, your
motor or ESC can get damage. Please sensor cover screw lock tightly.
Reduced the timing, motor RPM and
torque reduce. Power consumption and
temperature gets reduce.
Technical Specs
REFERENCE
TURNS DESIGN
KN-K11901001 4,5 Sensored 540
KN-K11901002 5,5 Sensored 540
KN-K11901003 6,5 Sensored 540
KN-K11901004 7,5 Sensored 540
KN-K11901005 8,5 Sensored 540
KN-K11901006 10,5 Sensored 540
KN-K11901007 10,5 Sensored 540
KN-K11901008 13,5 Sensored 540
KN-K11901009 17,5 Sensored 540
KN-K11901010 21,5 Sensored 540
Increase the timing, motor RPM and
torque increase. Power consumption and
temperature increases.
MAX ROTOR
SIZE LIPO
AMPS POLES
1-2S 108A 2
1-2S 100A 2
1-2S 94A 2
1-2S 86A 2
1-3S 80A 2
1-3S 70A 2
1-3S 63A 2
1-3S 49A 2
1-3S 34A 2
1-3S 28A 2
USER MANUAL
IO RESISTANCE ROTOR
WATTS
(7.4V) (Ω) (mm)
8.1A 0,0028 490 Ø12.3*Ø5
6.5A 0,0039 430 Ø12.3*Ø5
7.2A 0,0063 390 Ø12.5*Ø5
5.8A 0,0073 360 Ø12.5*Ø5
5.2A 0,0103 340 Ø12.5*Ø5
4.0A 0,0151 270 Ø12.5*Ø5
5.5A 0,0147 250 Ø12.5*Ø7.2 4 400
4.0A 0,0223 190 Ø12.5*Ø7.2 3 700
3.2A 0,0376 130 Ø12.5*Ø7.2 2 900
2.4A 0,0584 100 Ø12.5*Ø7.2 2 300
ADJUST TIMING
Kv WEIGHT SHAFT DIAMETER
(RPM/VOLT) (g) (INCHES)
8 000 166 Ø3.175
6 750 166 Ø3.175
5 150 166 Ø3.175
4 500 166 Ø3.175
4 000 166 Ø3.175
3 300 166 Ø3.175
155 Ø3.175
155 Ø3.175
155 Ø3.175
155 Ø3.175
ENG
TYPE
MODIFIED
MODIFIED
MODIFIED
MODIFIED
MODIFIED
MODIFIED
SPEC
SPEC
SPEC
SPEC