Feiss OL11100 Guide Rapide

Installation Instructions for
Pediment 2 and 3 Light Outdoor Wall
Outdoor
G ENERAL RODUCT NFORMATION P
This product is listed by one of the following
" ationally ecognized esting aboratory" N R T
These fixtures are intended to be installed utilizing NEC compliant
junction boxes.
This product is suitable for wet locations.
This product may be dimmed with a standard incandescent dimmer.
1A
CANDLE FOLLOWER
CANDLE TUBE
1 Install all glass panels by carefully sliding them into the housing and securing them using the tabs.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house junction box.
2
Install the candle followers by placing them on top of the candle tubes.
3
Screws the lamp into the sockets. Refer to the label on the socket for Max Wattage information.
4
5 For wet locations, caulk around the base of the fixture using waterproof construction sealant.
I :
L
LAMP
4
3
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1
1
OL11100_OL11101_OL11102_OL11104
OL11100, OL11101,
OL11102, OL11104
HOUSING
GLASS PANEL
TAB
1.0