Télécharger Imprimer la page

Publicité

Liens rapides

28.22 · Technische Änderungen vorbehalten · Technical amendments reserved · Modifications techniques réservées
!
Decken- und Wandleuchte für die Verwendung im Innenbereich
Ceiling and wall luminaire for indoor use
Plafonnier et applique pour utilisation à l'intérieur
39
L
N
39
50
Gebrauchsanweisung
Anwendung
Decken- und Wandleuchte · Innenleuchte mit
schlagfester Abdeckung aus Kunststoff und
Metallgehäuse, für alle Beleuchtungsaufgaben.
Überall dort, wo eine weiche und gleichmäßige
Lichtstärkeverteilung benötigt wird.
Produktbeschreibung
Metallgehäuse, Oberfläche Farbe weiß
Schlagfeste Abdeckung aus Kunststoff, weiß,
mit Gleitriegelverschluss
2 Befestigungsbohrungen ø 5,5 mm
Abstand 155 mm
1 Leitungseinführung zur Durchverdrahtung
der Netzanschlussleitung
Anschlussklemme 2,5@
mit Steckvorrichtung
Schutzleiteranschluss
LED-Netzteil
220-240 V x 0/50-60 Hz
DC 170-280 V
BEGA Thermal Switch
®
Temporäre thermische Abschaltung zum
Schutz temperaturempfindlicher Bauteile
Schutzklasse I
r – Sicherheitszeichen
c  – Konformitätszeichen
Gewicht: 2,2 kg
Dieses Produkt enthält Lichtquellen der
Energieeffizienzklasse(n) D
Sicherheit
Für die Installation und für den Betrieb
dieser Leuchte sind die nationalen
Sicherheitsvorschriften zu beachten.
Die Montage und Inbetriebnahme darf nur
durch eine Elektrofachkraft erfolgen.
Der Hersteller übernimmt keine Haftung für
Schäden, die durch unsachgemäßen Einsatz
oder Montage entstehen.
Werden nachträglich Änderungen an der
Leuchte vorgenommen, so gilt derjenige als
Hersteller, der diese Änderungen vornimmt.
Ø 5,5
Instructions for use
Application
Ceiling and wall luminaire · indoor luminaire
made of impact resistant synthetic diffuser
and metal housing, for all lighting tasks. They
are ideal for places where a soft and uniform
lighting distribution is required.
Product description
Metal housing, finish Colour white
Impact resistant synthetic diffuser, white,
with sliding-bolt closure
2 mounting holes ø 5.5 mm
Distance apart 155 mm
1 cable entry for through-wiring
for mains cable
Connecting terminal 2.5@
with plug connection
Earth conductor connection
LED power supply unit
220-240 V x 0/50-60 Hz
DC 170-280 V
BEGA Thermal Switch
Temporary thermal shutdown to protect
temperature-sensitive components
Safety class I
r – Safety mark
c  – Conformity mark
Weight: 2.2 kg
This product contains light sources of energy
efficiency class(es) D
Safety
The installation and operation of this luminaire
are subject to national safety regulations.
Installation and commissioning may only be
carried out by a qualified electrician.
The manufacturer accepts no liability for
damage caused by improper use or installation.
If subsequent modifications are made to
the luminaire, the person responsible for
these modifications shall be considered the
manufacturer.
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com
Ø 350
Fiche d'utilisation
Utilisation
Plafonnier et applique · luminaire d`intérieur en
vasque synthétique antichocs avec armature
métallique, pour toutes sortes d'éclairages.
Partout là où l'on exige une répartition
lumineuse douce et uniforme.
Description du produit
Armature métallique, finition Couleur blanc
Vasque synthétique antichocs, blanche,
avec fermeture à baïonette
2 trous de fixation ø 5,5 mm
Entraxe 155 mm
1 entrée de câble pour branchement en
dérivation câble de raccordement
Bornier 2,5@ avec connecteur embrochable
Raccordement de mise à la terre
Bloc d'alimentation LED
220-240 V x 0/50-60 Hz
DC 170-280 V
BEGA Thermal Switch
Interruption thermique temporaire pour
®
protéger les composants sensibles à la
température
Classe de protection I
r – Sigle de sécurité
c  – Sigle de conformité
Poids: 2,2 kg
Ce produit contient des sources lumineuses de
classe d'efficacité énergétique D
Sécurité
Pour l'installation et l'utilisation de ce luminaire,
respecter les normes de sécurité nationales.
L'installation et la mise en service ne doivent
être effectuées que par un électricien agréé.
Le fabricant décline toute responsabilité pour
tout dommage résultant d'une mise en œuvre
ou d'une installation inappropriée du produit.
Si des modifications sont apportées
ultérieurement au luminaire, l'intervenant sera
considéré comme étant le fabricant.
23 296 P
r
é
8
85
®
1 / 3

Publicité

loading

Sommaire des Matières pour BEGA 23 296 P

  • Page 1 Leuchte vorgenommen, so gilt derjenige als manufacturer. considéré comme étant le fabricant. Hersteller, der diese Änderungen vornimmt. BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com 1 / 3...
  • Page 2 To release the synthetic diffuser from the pratiqué en le tournant vers la gauche. luminaire housing, turn it counter-clockwise. Das Abnehmen der Kunststoffabdeckung erfolgt durch Linksdrehung. 2 / 3 BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com...
  • Page 3 LED power supply unit DEV-0141/350 Bloc d’alimentation LED DEV-0141/350 LED-Modul 3000 K LED-0529/930 LED module 3000 K LED-0529/930 Module LED 3000 K LED-0529/930 BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com 3 / 3...

Ce manuel est également adapté pour:

23 296 pk3B 23 296pk3