Télécharger Imprimer la page

BEGA UniLink 84 837 Fiche D'utilisation

Projecteur compact

Publicité

Liens rapides

46.21 · Technische Änderungen vorbehalten · Technical amendments reserved · Modifications techniques réservées
!
Kompaktscheinwerfer BEGA UniLink
Compact floodlight BEGA UniLink
Projecteur compact BEGA UniLink
Ø 140
Ø 140
Gebrauchsanweisung
Anwendung
Ortsveränderlicher Kompaktscheinwerfer BEGA
UniLink mit Erdspieß und 5 m Anschlussleitung
mit Steckverbindung.
Für den Anschluss des Scheinwerfers ist
ein separat zu bestellender Netzstecker
erforderlich.
Die landesüblichen Netzstecker
mit 0,5 m Anschlussleitung sowie
Verlängerungsleitungen und Fünffach-Verteiler
stehen als Ergänzungsteile zur Verfügung.
Produktbeschreibung
Scheinwerfer besteht aus Aluminiumguss,
Aluminium und Edelstahl
Beschichtungstechnologie BEGA Unidure
Erdspieß aus glasfaserverstärktem Kunststoff
Sicherheitsglas mit optischer Struktur
Silikondichtung
Reflektor aus eloxiertem Reinstaluminium
Schwenkbereich -60°/+60°
5 m Anschlussleitung
X05RN-F FEP 2 × 1@ + 1G2,5@ mit
Steckverbindung
LED-Netzteil
220-240 V y 50-60 Hz
Schutzklasse I
Schutzart IP 65
Staubdicht und Schutz gegen Strahlwasser
Schlagfestigkeit IK07
Schutz gegen mechanische
Schläge < 2 Joule
c  – Konformitätszeichen
Gewicht: 1,8 kg
Sicherheit
Für die Installation und für den Betrieb
dieser Leuchte sind die nationalen
Sicherheitsvorschriften zu beachten.
Der Hersteller übernimmt keine Haftung für
Schäden, die durch unsachgemäßen Einsatz
oder Montage entstehen.
Werden nachträglich Änderungen an der
Leuchte vorgenommen, so gilt derjenige als
Hersteller, der diese Änderungen vornimmt.
140
140
Instructions for use
Application
Portable compact floodlight BEGA UniLink with
earth spike and 5 m connecting cable with plug
connector.
A separate mains plug must be ordered in
order to connect the floodlight to the mains.
The various country-specific mains plugs with
0.5 m connecting cable, as well as extension
cables and five-way distribution boxes are
available as accessories.
Product description
Floodlight made of aluminium alloy,
aluminium and stainless steel
BEGA Unidure
coating technology
®
®
Earth spike made of glass fibre reinforced
synthetic material
Safety glass with optical structure
Silicone gasket
Reflector made of pure anodised aluminium
Swivel range -60°/+60°
5 m mains supply cable
X05RN-F FEP 2 × 1@ + 1G2,5@ with plug-in
connector
LED power supply unit
220-240 V y 50-60 Hz
Safety class I
Protection class IP 65
Dust-tight and protection against water jets
Impact strength IK07
Protection against mechanical
impacts < 2 joule
c  – Conformity mark
Weight: 1.8 kg
Safety
The installation and operation of this luminaire
are subject to national safety regulations.
The manufacturer accepts no liability for
damage caused by improper use or installation.
If subsequent modifications are made to
the luminaire, the person responsible for
these modifications shall be considered the
manufacturer.
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com
60°
60°
60°
60°
Fiche d'utilisation
Utilisation
Projecteur compact BEGA UniLink avec
piquet et câble de raccordement de 5 m avec
connecteur pour installation mobile.
Pour brancher le projecteur, une fiche réseau à
commander séparément est nécessaire.
Les fiches nationales conventionnelles avec
câble de raccordement de 0,5 m ainsi que les
rallonges et répartiteurs à cinq sorties sont
disponibles comme pièces complémentaires.
Description du produit
Projecteur fabriqué en fonderie d'aluminium,
aluminium et acier inoxydable
Technologie de revêtement BEGA Unidure
Piquet en matière synthétique renforcée à la
fibre de verre
Verre de sécurité à structure optique
Joint silicone
Réflecteur en aluminium pur anodisé
Inclinaison -60°/+60°
5 m de câble
X05RN-F FEP 2 × 1@ + 1G2,5@ avec
connecteur à fiche
Bloc d'alimentation LED
220-240 V y 50-60 Hz
Classe de protection I
Degré de protection IP 65
Etanche à la poussière et protégé contre les
jets d'eau
Résistance aux chocs mécaniques IK07
Protection contre les chocs
mécaniques < 2 joules
c  – Sigle de conformité
Poids: 1,8 kg
Sécurité
Pour l'installation et l'utilisation de ce luminaire,
respecter les normes de sécurité nationales.
Le fabricant décline toute responsabilité pour
tout dommage résultant d'une mise en œuvre
ou d'une installation inappropriée du produit.
Si des modifications sont apportées
ultérieurement au luminaire, l'intervenant sera
considéré comme étant le fabricant.
84 837
IP 65
®
1 / 3

Publicité

loading

Sommaire des Matières pour BEGA UniLink 84 837

  • Page 1 Leuchte vorgenommen, so gilt derjenige als manufacturer. considéré comme étant le fabricant. Hersteller, der diese Änderungen vornimmt. BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com 1 / 3...
  • Page 2 Gelenkschraube anziehen. Tighten the joint screw. Serrer la vis de la rotule. 2 / 3 BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com...
  • Page 3 Module LED 4000 K LED-0623/940 Reflektor 76 001 023 M Reflector 76 001 023 M Réflecteur 76 001 023 M Dichtung Glas 83 001 679 Gasket glass 83 001 679 Joint du verre 83 001 679 BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com 3 / 3...

Ce manuel est également adapté pour:

Unilink 84 837k3Unilink 84 837k4