Télécharger Imprimer la page

Publicité

Liens rapides

26.19 · Technische Änderungen vorbehalten · Technical amendments reserved · Modifications techniques réservées
!
Aufsatzleuchte
Pole top luminaire
Luminaire tête de mât
Gebrauchsanweisung
Anwendung
Aufsatzleuchte mit asymmetrisch-bandförmiger
Lichtstärkeverteilung.
Die asymmetrisch-bandförmige
Lichtstärkeverteilung eignet sich besonders für
die Beleuchtung von Straßen nach
DIN EN 13201.
Für Lichtpunkthöhen von 4000 - 6000 mm.
Produktbeschreibung
Leuchte besteht aus Aluminiumguss,
Aluminium und Edelstahl
Beschichtungstechnologie BEGA Unidure
Kunststoffabdeckung mit optischer Struktur
Reflektor aus eloxiertem Reinstaluminium
Für Mastzopf ø 76 mm
Einstecktiefe 135 mm
Anschlussleitung X05BQ-F 5 G 1 mm²
Leitungslänge 6 m
BEGA Ultimate Driver
®
LED-Netzteil
220-240 V x 0/50-60 Hz
DC 176-264 V
DALI-steuerbar
Zwischen Netz- und Steuerleitungen ist eine
Basisisolierung vorhanden
BEGA Thermal Control
®
Temporäre thermische Regulierung der
Leuchtenleistung zum Schutz temperatur-
empfindlicher Bauteile, ohne die Leuchte
abzuschalten
Schutzklasse I
Schutzart IP 65
Staubdicht und Schutz gegen Strahlwasser
Schlagfestigkeit IK10
Schutz gegen mechanische
Schläge < 20 Joule
r – Sicherheitszeichen
c  – Konformitätszeichen
Horizontale Windangriffsfläche: 0,16 m²
Gewicht: 10,5 kg
Dieses Produkt enthält Lichtquellen der
Energieeffizienzklasse(n) B, C
Überspannungsschutz
Die in der Leuchte verbauten elektronischen
Komponenten sind nach DIN EN 61547 gegen
Überspannung geschützt.
Um einen zusätzlichen Schutz z. B. vor
Transienten etc. zu erreichen, empfehlen wir
separate Überspannungsschutzkomponenten.
Sie finden diese auf unserer Website unter
www.bega.com.
Instructions for use
Application
Pole-top luminaire with asymmetrical flat beam
light distribution.
The asymmetrical and flat beam light
distribution is suitable especially for
the illumination of streets according to
DIN EN 13201.
For mounting heights 4000 - 6000 mm.
Product description
Luminaire made of aluminium alloy,
aluminium and stainless steel
BEGA Unidure
coating technology
®
®
Synthetic cover with optical structure
Reflector made of pure anodised aluminium
For pole top ø 76 mm
Slip fitter insert depth 135 mm
Connecting cable X05BQ-F 5 G 1 mm²
Cable length 6 m
BEGA Ultimate Driver
LED power supply unit
220-240 V x 0/50-60 Hz
DC 176-264 V
DALI controllable
A basic isolation exists between power cable
and control line
BEGA Thermal Control
Temporary thermal regulation to protect
temperature-sensitive components without
switching off the luminaire
Safety class I
Protection class IP 65
Dust-tight and protection against water jets
Impact strength IK10
Protection against mechanical
impacts < 20 joule
r – Safety mark
c  – Conformity mark
Horizontal wind catching area: 0.16 m²
Weight: 10.5 kg
This product contains light sources of energy
efficiency class(es) B, C
Overvoltage protection
The electronic components installed in the
luminaire are protected against overvoltage in
accordance with DIN EN 61547.
To achieve an additional protection against
e. g. transients, etc. we recommend separate
overvoltage protection components.
You can find them on our website at
www.bega.com.
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com
Ø 500
76
830
Fiche d'utilisation
Utilisation
Luminaire tête de mât à répartition lumineuse
asymétrique-elliptique.
La répartition lumineuse asymétrique-elliptique
est particulièrement appropriée pour un
éclairage de rues selon normes DIN EN 13201.
Pour hauteurs de feu 4000 - 6000 mm.
Description du produit
Luminaire fabriqué en fonderie d'aluminium,
aluminium et acier inoxydable
Technologie de revêtement BEGA Unidure
Vasque synthétique à structure optique
Réflecteur en aluminium pur anodisé
Pour tête de mât ø 76 mm
Profondeur d'embout 135 mm
Câble de raccordement X05BQ-F 5 G 1 mm²
Longueur de câble 6 m
BEGA Ultimate Driver
®
Bloc d'alimentation LED
220-240 V x 0/50-60 Hz
DC 176-264 V
Pilotage DALI
Une isolation d'origine existe entre le réseau et
les câbles de commande
BEGA Thermal Control
®
Régulation thermique temporaire de la
puissance des luminaires pour protéger les
composants sensibles à la température, sans
pour autant éteindre les luminaires
Classe de protection I
Degré de protection IP 65
Etanche à la poussière et protégé contre les
jets d'eau
Résistance aux chocs mécaniques IK10
Protection contre les chocs
mécaniques < 20 joules
r – Sigle de sécurité
c  – Sigle de conformité
Prise au vent horizontale : 0,16 m²
Poids: 10,5 kg
Ce produit contient des sources lumineuses de
classe d'efficacité énergétique B, C
Protection contre les surtensions
Les composants électroniques installés dans
le luminaire sont protégés contre la surtension
conformément à la norme DIN EN 61547.
Pour obtenir une protection supplémentaire
contre la surtension, les tensions transitoires
etc., nous proposons des composants de
protection séparés. Vous les trouverez sur notre
site web www.bega.com.
77 910
r
IP 65
®
®
®
1 / 3

Publicité

loading

Sommaire des Matières pour BEGA 77 910

  • Page 1 Sie finden diese auf unserer Website unter You can find them on our website at protection séparés. Vous les trouverez sur notre www.bega.com. www.bega.com. site web www.bega.com. BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com 1 / 3...
  • Page 2 Ablagerungen säubern. Do not use high pressure cleaners. Ne pas utiliser de nettoyeur haute pression. Dafür keinen Hochdruckreiniger verwenden. 2 / 3 BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com...
  • Page 3 Module LED 4000 K LED-0276/840 Reflektor 76 001 102 Reflector 76 001 102 Réflecteur 76 001 102 Dichtung 83 000 439 Gasket 83 000 439 Joint 83 000 439 BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com 3 / 3...

Ce manuel est également adapté pour:

77910k477910k3