Thetford XR17200 Mode D'emploi

Kit Contents: K1
A
K1
Fig. 1
New Ref. Description
K1 A Regulator Adapter
NI B Burner Grate
NI C/C1 Top Cover / Screws
NI D Propane Gas Supply Line
NI E Regulator
NI Not Included: Reference Only
Tools Needed:
■ #2 Phillips Screwdriver
■ (2) 8 inch Adjustable Wrenches
■ Leak Test Solution
■ Installation / Owner's Manual
This procedure is to be performed by authorized service
WARNING
!
personnel only. Improper installation, adjustment, altera-
ATTENTION
tion, service or maintenance can cause injury or property
damage.
Printed in U.S.A./Imprimé aux É.-U./Impreso en EE. UU.
Thetford Corporation
7101 Jackson Road
Ann Arbor, MI 48103
1-800-543-1219
XR17200 and XC200
Regulator Adapter
C1
Ensemble de réparation
www.thetford.com
B
A K1
E
C
Replace Part
Be sure the appliance has been isolated from the pro-
WARNING
!
pane gas supply before starting!
ATTENTION
1. Remove B; set aside.
2. Remove (3x); set aside.
C1
3. Remove ; set aside.
C
Fire and explosion hazard! Always use two wrenches to
! ! ! ! NOTICE AVISO ATTENTION CAUTION ATENCIÓN DANGER AVIS
remove or install gas fi ttings-do not overtighten! Failure
ATTENTION ATTENTION ATTENTION
to comply could damage fi ttings which could cause
dangerous propane leak leading to death or destruction
of property.
4. Using two (2) wrenches, remove
5. Using two (2) wrenches, remove
Using new part, reverse steps 5 through 1 to replace and reinstall.
6. Test the connections of
K1, D,
Do not use any leak test solution that contains ammonia
WARNING
!
or chlorine. Ammonia and chlorine corrode brass and
ATTENTION
copper components.
Part No. /N° de pièce/Pieza n.º 639452A (03.20.2017)
639453
Service Kit
Juego de servicio
D
from
D A.
from
A E.
and for leaks.
E