Télécharger Imprimer la page

Publicité

Liens rapides

Mounting instructions
Montageanleitung
Instructions d'installation
Technische Daten
 Spannung 230 V
 Schutzklasse II
 Zulässige Betriebstemperatur
-70 °C bis 200 °C
Typ
Model
CSC2-10
Type
Länge beheizt
Heated length
1 m
Longueur chauffante
Leistung
40 W/m
40 W
Wattage
50 W/m
50 W
Puissance
Bestimmungsgemäße
Verwendung
 Tauwasserablaufheizung
 Tropfwannenheizung
Montage und Anschluss müssen
nach dieser Anleitung erfolgen.
Alle nicht bestimmungsgemäßen
Verwendungen sind verboten.
Sicherheitsvorschriften
Bei der Montage und
Inbetriebnahme sind alle
Sicherheits- und Unfallverhütungs-
vorschriften sowie die Richtlinien
und Normen im Einbauland zu
beachten.
Das Heizkabel darf nur von einer
autorisierten Fachkraft montiert
werden!
Der Elektroanschluss darf nur von
einer Elektrofachkraft gemäß den
elektrotechnischen Regeln
vorgenommen werden.
Veränderungen am Heizkabel sind
nicht zulässig.
CSC2_inst/06/11
Drain line heater CSC2
Ablaufheizung CSC2
Résistance d'écoulement CSC2
Technical data
 Electric tension 230 V
 Protection class II
 Admissible operating temperature
-70 °C to 200 °C
CSC2-13
CSC2-15
CSC2-20
1.3 m
1,5 m
2 m
52 W
60 W
80 W
65 W
75 W
100 W
Determined use
 Heating of drain pipe
 Heating of drip pan
Mounting and connection must be
carried out according to these
instructions.
Use for applications other than
listed above is not allowed.
Safety regulations
For mounting and start up all
regulations for safety and accident
prevention as well as directions and
standards of the individual country
have to be observed.
The heating cable may only be
mounted by authorized personell!
The electrical connection may only
be made by an electrical technician
according to the electrotechnical
regulations.
Modifications on the heating cable
are not allowed.
Caractéristiques techniques
 Tension 230 V
 Classe de protection II
 Température de service
admissible de -70 °C à 200 °C
CSC2-30
CSC2-40
CSC2-50
3 m
4 m
5 m
120 W
160 W
200 W
150 W
200 W
250 W
Précautions d'utilisation
 Chauffage pour tuyauterie
d'écoulement.
 Chauffage pour bac de
condensat.
Le montage et le branchement
doivent s'effectuer conformément
aux instructions d'installation.
Toute utilisation ne respectant pas
les précautions d'utilisation est
interdite.
Consignes de sécurité
Le montage et la mise en service
sont soumis aux normes,
consignes de sécurité et
prescriptions de prévention des
accidents en vigueur du pays.
L'installation devra être réalisée par
des professionnels reconnus!
Les raccordements électriques
doivent être effectués par des
professionnels conformément aux
normes en vigueur dans le pays.
Les modifications du câble
chauffant sont interdites.
CSC2-60
6 m
240 W
300 W
1

Publicité

loading

Sommaire des Matières pour flexelec CSC2

  • Page 1 Mounting instructions Drain line heater CSC2 Montageanleitung Ablaufheizung CSC2 Instructions d'installation Résistance d'écoulement CSC2 Technische Daten Technical data Caractéristiques techniques  Spannung 230 V  Electric tension 230 V  Tension 230 V  Schutzklasse II  Protection class II ...
  • Page 2 Mounting instructions Drain line heater CSC2 Montageanleitung Ablaufheizung CSC2 Instructions d'installation Résistance d'écoulement CSC2 Montage Mounting Installation Das Heizkabel darf nicht gekürzt The heating cable or cold lead must Ne pas couper la partie chauffante werden. not be shortened. ou le câble d’alimentation.

Ce manuel est également adapté pour:

Csc2-10Csc2-13Csc2-15Csc2-20Csc2-30Csc2-40 csc2-50 ... Afficher tout