Télécharger Imprimer la page

Publicité

Liens rapides

INSTRUCTIONS
SOLENOID VALVE series MDF-H/MDF-RH
Applicable to fluids and refrigerants of GROUP 2 (solder version models with DN<25 mm to fluids of GROUP
1) according to Directive 2014/68/EU (15 May 2014) or GROUP A1 (solder version models with DN<25 mm to
fluids of GROUP A3/A2L) according to ANSI-ASHRAE 34-2010.
Product Range
MDF-A02(6H-22H,6L-15L)
MDF-A03(2H-22H,2L-15L)
MDF-RH
1
3
4-5 Nm
When closed
5
N₂
Copyright © SANHUA 2020
Subject to change without notice
Temperature allowed range (TS):
-30°C to +105°C (-22°F to +220°F)
-30°C to +105°C (-22°F to +220°F)
-30°C to +105°C (-22°F to +220°F)
2.5±0.2Nm
5±0.5Nm
N₂
Max. 105°C(220°F)
Design Pressure (PS):
45 bar (653 psi)
45 bar (653 psi)
49 bar (710 psi)
2
4
90°
6
1
90°
Table 1: Pipe connection
Torque
Torque
Size
(lbf.ft)
(Nm)
1/4"
15
11
22
3/8"
30
41
5/8"
55
II-MDF-MU-R2005

Publicité

loading

Sommaire des Matières pour Sanhua MDF-A02

  • Page 1 -30°C to +105°C (-22°F to +220°F) 49 bar (710 psi) 90° 90° 4-5 Nm 2.5±0.2Nm 5±0.5Nm When closed N₂ N₂ Table 1: Pipe connection Torque Torque Size (lbf.ft) (Nm) 1/4” 3/8” 5/8” Max. 105°C(220°F) Copyright © SANHUA 2020 II-MDF-MU-R2005 Subject to change without notice...
  • Page 2 INSTRUCTIONS (0.4±0.1)Nm When closed (0.6~0.7)Nm When closed (0.2±0.05)Nm When closed MDF-A03 Copyright © SANHUA 2020 II-MDF-MU-R2005 Subject to change without notice...
  • Page 3 No se recomienda su открытый). Не recommend to take it 议打开电磁 faire. das MV non per necessaria desmontaje en la рекомендуется apart. 阀。 auseinander zu manutenzione. operación de изымать внутренние bauen. soldadura части Copyright © SANHUA 2020 II-MDF-MU-R2005 Subject to change without notice...

Ce manuel est également adapté pour:

Mdf-a03Mdf-rh