Hyperkin PSP 2000 Guide De Démarrage Rapide

HDTV CABLE
Quick Start Guide
Thank you for purchasing the HDTV Cable for PSP® 2000 and 3000 models.
For your safety, and the safety of others, please carefully read this Quick Start
Guide before using this product.
Setting up the HDTV Cable for PSP® 2000 and 3000 models
1. Insert the HDTV Cable into your handheld's headphone jack and serial port. Insert the other
end into your HDTV (or any HD display).
2. Connect the included Micro cable to the Micro port and the other end to a 5V 1A USB power
source (not included).
3. Power ON your handheld and go into the Settings. Scroll through the options and select
"Connected Display Settings".
Note: In the Connected Display Settings you can also change the aspect ratio from its native
display of 16:9 to 4:3.
4. Scroll up and select "Switch Video Output". Once selected a notification window will appear
on your handheld's screen asking if you want to display video output on a connected device.
Select "Yes". The video display will now appear on your HDTV screen.
5. When you are done playing, unplug the HDTV cable. Once unplugged, the image will revert
to your handheld's screen.
Note: You will need to configure your handheld's display settings every time you want to
display it on your TV.
Using the Zoom Switch
The screen's default size may be displayed relatively small in comparison to your HDTV screen.
Using the Zoom switch on your HDTV cable will allow you to expand the size of your video
display by zooming in.
1. Moving the switch to the right side labeled "Zoom" will enable a zoomed in display.
2. Moving the switch to the left side labeled "Default" will enable the default video display.
Note: You can change this setting at any time during game play.
For troubleshooting, contact us at Support@hyperkin.com.
Note: The HDTV cable needs to be disconnected from your console in order to switch to Sleep
Mode.
PSP® 2000 &
for 3000 models
Cable Status Guide
The colored LED INDICATOR LIGHTS on your cable tells you your cable's status. The BLUE
light indicates that the cable is transmitting signal. The RED light indicates the cable is
powered ON.
Both Blue and Red Light On = Cable is working
Red Light Only = Sleep Mode
If your cable has no signal for 10 minutes, it will switch to Sleep Mode.
Note: If your cable is not functioning correctly, an additional power source might be required.
Connect the included Micro cable into the Micro port on the HD Cable and the other end into a
5V 1A USB power source. Power source is not included.
Guide de Démarrage Rapide
Merci d'avoir acheté le câble HDTV pour les modèles PSP® 2000 et 3000.
Pour votre sécurité et celle des autres, veuillez lire soigneusement ce guide
de démarrage rapide avant d'utiliser ce produit.
Installation du Câble HDTV pour les modèles PSP® 2000 et 3000
1. Insérez le câble HDTV dans la prise casque et le port série de votre ordinateur de poche.
Insérez l'autre extrémité dans votre téléviseur HD (ou tout autre écran HD).
2. Connectez le câble Micro fourni au port Micro et l'autre extrémité à une source
d'alimentation USB 5V 1A (non incluse).
3. Allumez votre appareil et allez dans les réglages. Faites défiler les options et sélectionnez
"Paramètres d'affichage connectés".
Remarque: Dans les Paramètres d'affichage connectés, vous pouvez également changer le
format d'image de son affichage natif de 16:9 à 4:3.
4. Faites défiler vers le haut et sélectionnez " Commuter la sortie vidéo ". Une fois