Waterpik AquaScape ASD-833 Manuel D'instructions

INSTALLATION
3. Upon opening the package, pipe adapter will be attached
to lock ring. Remove pipe adapter from lock ring by turning
counter clockwise.
AquaScape
™
4. Attach showerhead to curved shower arm by hand tightening
Spa Showerhead
clockwise. Wrap a soft cloth around pivot ball and tighten with
an open end 7/8" wrench.
Utilisation de la douche
5. Screw pipe adapter onto shower pipe and tighten. Wrap a
Waterpik ® AquaScape ™
soft cloth around pipe adapter and tighten with an open end
7/8" wrench.
Cabezal de ducha tipo spa
Waterpik ® AquaScape ™
6. Make sure black washer is inside lock ring. Lift showerhead and
showerarm (assembled in step 3) into position at shower pipe
level, lining up the ribs on the pipe adapter with the grooves in
the end of the showerarm. Slide lock ring onto pipe adapter and
tighten by hand until snug.
7. Test for leaks. Tighten connections as needed.
Instruction Manual
Manuel d'instructions
Manual de Instrucciones
Model: ASD-833
ASD-839
INSTALLATION
™
Easy to follow instructions on how to install your new AquaScape
Showerhead. Follow steps in the order shown, for best results.
TOOLS NEEDED
7/8" open end wrench is recommended.
(Wrap pivot ball with a soft cloth to prevent fittings from scratching.)
PREPARE
1. Remove old showerhead from shower pipe. Be sure to remove
old pipe tape from threads if necessary.
2. Wrap pipe tape (included) 2 to 3 times around the threads on
A
the shower pipe .
Wing nuts Shower pipe
Pipe adapter
A
Pivot ball
Wrap pipe tape here
Lock ring
(black washer should be inside)
WPK8823_Aqua_Spa_FINAL.indd 1
TO ADJUST ARM SIDE TO SIDE:
1. Loosen lock ring and slide it off pipe adapter
2. Re-position onto the pipe adapter and re-tighten the lock ring
Lock ring
Wing nuts
Have questions or need assistance?
visit www.waterpik.com
or call for Customer Service at
1-800-525-2774
8:00 a.m. to 4:00 p.m.,
Mountain Standard Time, Monday-Friday
Waterpik Technologies
Personal Healthcare Products
1730 East Prospect Road
Fort Collins, CO 80553-0001
FN20008751-F AA
Printed in China.
Made in China.
10/21/05 10:16:47 AM