Publicité
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
1.6 Safety codes and standards
This appliance complies with the latest version of one or
more of the following standards:
¡ CAN/CSA C22.2 No. 61 - Household Cooking Ranges
¡ CSA C22.2 No. 64 - Household Cooking and Liquid-
Heating Appliances
¡ UL 1026 - Electric Household Cooking and Food
Serving Appliances
¡ UL 858 - Household Electric Ranges
It is the responsibility of the owner and the installer to
determine if additional requirements and/or standards
apply to specific installations.
1.7 Electrical safety
¡ Installer - show the owner the location of the circuit
breaker or fuse. Mark it for easy reference.
¡ If required by the National Electrical Code (or Canadian
Electrical Code), this appliance must be installed on a
separate branch circuit.
¡ Local codes vary. The installer is responsible for
ensuring that the installation, connections, and
grounding comply with all applicable codes. The
manufacturer is not responsible for improper installation
or the failure to follow appropriate local codes and
regulations.
¡ Be sure your appliance is properly installed and
grounded by a qualified technician in accordance with
the National Electrical Code ANSI/NFPA 70 latest
edition and local electrical code requirements.
¡ Only a power supply cord kit rated for this appliance
and marked "For Use With Ranges" shall be used.
¡ Refer to the rating plate for more information.
→ "Rating plate location", Page 16
WARNING
Before installing, turn power OFF at the service panel.
▶
Lock service panel to prevent power from being turned
ON accidentally.
WARNING
ELECTRIC SHOCK HAZARD
▶
Disconnect power before installing or servicing. Before
turning power ON, be sure that all controls are in the
OFF position.
DO NOT remove connections.
▶
DO NOT use an extension cord.
▶
Improper grounding can result in a risk of electric
▶
shock.
Failure to follow these instructions can result in death,
▶
fire, or electrical shock.
GROUNDING INSTRUCTIONS
This appliance must be grounded.
▶
▶
Grounding reduces the risk of electric shock by
providing a safe pathway for electric current in the
event of a short circuit.
Be sure your appliance is properly installed and
▶
grounded by a qualified technician.
▶
Installation, electrical connections and grounding must
comply with all applicable codes.
Do not use an extension cord. If the power supply cord is
too short, have a qualified electrician install an outlet near
the appliance.
Before you turn on power supply, make sure all controls
are in the OFF position.
1.8 State of California Proposition 65
Warnings
This product may contain a chemical known to the State
of California, which can cause cancer or reproductive
harm. Therefore, the packaging of your product may bear
the following label as required by California:
1.9 Transport
Follow these precautions when transporting your
appliance.
NOTICE:
To avoid damaging the appliance, use the transport
method shown in the following picture.
en-us
5
Publicité
