Velux W+RE 24 V/2 Mode D'emploi page 4

Technical data
Supply voltage
Circuit output
Contact rating
Sensor dimensions
Sensor weight
Sensor protection degree
Setting of wind trigger
Setting of wind/rain drop-out delay
Setting of wind actuation delay
Setting of monitoring
CE mark
Miscellaneous
The control unit must be connected by qualified personnel in compliance
with local regulations.
The sensor must be cleaned regularly depending on how dirty it is.
4 VELUX
®
18 V – 26 V AC or 20 V – 32 V DC
1 potential-free change-over contact
60 V/2 A
80 x 160 x 55 mm WxHxD/without wind wheel)
Approx. 0.7 kg
IP65
Approx. 3 to 14 m/s (+/- 20 %)
10 min./20 min.
2 sec./5 sec.
OFF/ON
In accordance with the EMC Directive and the Low Voltage Directive