Dräger X-am 2500 Notice D'utilisation page 30

Masquer les pouces Voir aussi pour X-am 2500:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 37
Operation
4.8
Calling the Quick Menu
In measuring mode, press the [+] key three times.
If functions in the quick menu are activated using the PC software
"Dräger CC Vision", you can select these functions using the
[+] key. If no functions have been activated in the quick menu,
the instrument remains in measuring mode.
Possible functions:
1. Bump test (configuration for bump test,
see technical manual)
2. Fresh air calibration
3. Delete peak values
4. Display pump information,
see technical manual
5. Activate or deactivate pump,
see technical manual
Press the OK key to activate the selected function.
Press the [+] key to cancel the active function and to switch to
measuring mode.
If no key is pressed for 60 seconds, the instrument returns
automatically to measuring mode.
28
4.9
Common user tasks
4.9.1
Replacing the batteries / rechargeable batteries
WARNING
!
Explosion hazard! To reduce the risk of ignition of a flammable
or explosive atmosphere, strictly adhere to the following
warning statements:
Do not throw used batteries into fire or try to open them by force.
Do not replace or charge batteries in potentially explosive
areas.
Do not use new batteries with used batteries, and do not mix
batteries from different manufacturers or of different types.
Remove batteries before maintenance work.
Batteries / rechargeable batteries are part of the Ex approval.
Only the following types may be used:
Alkaline batteries – T3 – (non rechargeable!)
Panasonic LR6 Powerline
Varta Type 4106 (
1
Varta Type 4006
Alkaline batteries – T4 – (non rechargeable!)
Duracell Procell MN1500
NiMHy rechargeable batteries – T3 – (rechargeable)
1
GP 180AAHC
temperature.
Only charge NiMH power packs T4 (type HBT 0000) or T4 HC
(type HBT 0100) with the appropriate Dräger charger. Charge
NiMH single cells for ABT 0100 battery holder as directed by
the manufacturer. Ambient temperature during charging:
0 to +40 °C.
1)
Not part of the BVS10 ATEX E 080X and PFG 10 G 001X technical suitability test.
1
power one) or
(industrial)
1
(1800 mAh) max. 40 °C ambient
Dräger X-am 2500

Hide quick links:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mqg 0011

Table des Matières