Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 2

Liens rapides

BEFORE OPERATION
Thank you for buying this PIONEER product.
Read the Instruction Manual carefully before using these speakers so that you
can operate them properly. After you have finished, put this manual away in a
safe place for future reference.
The rated impedance of these speakers is 8 . They must be connected to an
amplifier which accepts this type of load (miminum and maximum impedances
accepted by the amplifier are generally indicated near the speakers outlets: for
example "4
to 16 " or "6
to 16 ").
To guard against damage to these speakers due to an electric power overload,
take the following precautions:
Do not supply more than the maximum permitted power to the speakers
(see Specifications).
Any connection or switching on or off of part of the audio system (CD
player, tuner etc.) must be carried out after switching off the amplifier or at
least with the loudspeaker outlets disconnected (if the amplifier allows).
Interference caused by these operations will otherwise reach the speakers
and may damage the treble loudspeaker units.
When boosting particular frequencies using a graphic equaliser or bass
and treble correctors, make sure that you do not increase the amplifier
volume excessively, as the speakers will be overloaded more quickly.
Do not force a low-power amplifier to produce a high level of sound as
harmonic distortion increases rapidly in this situation and may pose a
danger to the treble speaker units.
Avoid touching the diaphragms and suspensions of speakers units as they are
fragile.
The speaker units in these speakers are magnetically shielded.
However, colours may blur if the speakers are positioned too close to a
television screen. If this happens, switch off the television and switch it
back on again after 15 to 30 minutes. If the problem persists, move the
speakers away from the television set.
INSTALLATION PRECAUTION
For optimum sound reproduction of high frequencies, the treble speaker units
must be at the same height as the listener's ears.
For low frequencies, it is possible to increase the level of bass sounds by
positioning the speakers close to a wall (the maximum increase being obtained
for a position in a corner of the listening room).
Do not install the speakers close to an oven or heating appliance. Avoid
exposing them to direct sunlight. High temperatures can distort the structure of
the enclosure and adversely affect the sound.
These speakers are heavy and fragile, and it is therefore dangerous to install
them in an unstable position.
If the speakers are hung on the wall, for added safety, attach the grilles using
provided accessory parts.
1
CONNECTIONS
Switch off the amplifier power supply (OFF).
Connect the cables to the input terminals on the rear of the speaker: Connect
the neutral cable to the
terminal and the live cable to the
forget that the red input terminal has positive polarity and that the black input
terminal has negative polarity.
Connect the cables to the loudspeaker outlet terminals of the amplifier. Connect
the live cable to the
terminal and the neutral cable to the
+
REMARKS :
Check that the cables are securely connected to the terminals. A loose
connection may cause not just intermittent or distorted sound but short-circuiting
and breakdown of the amplifier.
2
+
terminal. Do not
terminal.
SPEAKER SYSTEM
ENCEINTES ACOUSTIQUES
LAUTSPRECHERSYSTEM
SISTEMA ALTOPARLANTE
LUIDSPREKERSYSTEEM
HÖGTALARSYSTEM
SISTEMA DE ALTAVOCES
SISTEMA DE ALTIFALANTES
If the cables of one of the speakers have been connected with the wrong
polarities, you will find when listening to a stereo recording that bass sounds are
weakened and the stereo effect normally obtained between the two speakers
does not exist.
MAINTENANCE OF THE ENCLOSURE
Use a cloth to wipe away dust and dirt.
If the enclosure is very dirty, wipe with a soft cloth dipped in a neutral detergent
diluted five to six times with water, then wipe again with the dry cloth. Do not use
thinner, benzene, cleaning sprays or other chemical products on or near the
enclosures as the surfaces could be adversely affected.
SPECIFICATIONS
Enclosure ......................................................................Bookshelf type, enclosed
System ............................................................................. 2 ways, 2 speaker units
Speaker units :
Woofer ........................................................... Cone type, 10 cm
Tweeter ......................................................... Dome type, 2.5 cm
Nominal Impedance ...................................................................................... 8
Frequency range ................................................................... 80 Hz to 20 000 Hz
Sensitivity ..................................................................... 84 dB/W at 1 m distance
Maximum power ........................................................................................ 130 W
Dimensions.......................................130 mm (W) x 203 mm (H) x 153 mm (D)
Weight ..........................................................................................................1.9 kg
Accessory parts
Cables ...................................................................................................................2
Instruction Manual ..................................................................................................1
Warranty ................................................................................................................ 1
Fastener + screws .......................................................................................... 2 + 4
REMARK : The specifications and design of this product are subject to change
without notice, in the interests of improvements.
Discover the benefits of registering your product online at
http://www.pioneer.co.uk (or http://www.pioneer.eu)
http://www.pioneer.co.uk
http://www.pioneer.eu
INSTRUCTION MANUAL
MODE D'EMPLOI
BEDIENUNGSANLEITUNG
GUIDA PER L'USO
GEBRUIKSAANWIJZING
BRUKSANVISNING
GUIA DE OPERACIÓN
GUIA DE OPERAÇÃO
Strip the insulation at the tip of the cord
1
and twist the strands.
Turn the thumbscrew anti-clockwise,
2
make sure that the speaker cord is
inserted well into the hole and turn the
thumbscrew clokwise to fasten into
position.
3
Connect the hot-side speaker cord to the
+
terminal.
4
Connect the common-side speaker cord
to the
terminal.
Published by Pioneer Corporation.
©
2007 Pioneer Corporation.
All reproduction and translation rights reserved.
Printed in China <FRRD-202-B>
English

Publicité

Table des Matières
loading

Sommaire des Matières pour Pioneer S-F52-QL

  • Page 1 If the cables of one of the speakers have been connected with the wrong polarities, you will find when listening to a stereo recording that bass sounds are Thank you for buying this PIONEER product. weakened and the stereo effect normally obtained between the two speakers Read the Instruction Manual carefully before using these speakers so that you does not exist.
  • Page 2: Avant Utilisation

    PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia / Australie, TEL: (03) 9586-6300 PIONEER ELECTRONICS DE MEXICO S.A. DE C.V. Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico / Mexique, D.F. 11000 TEL: 55-9178-4270...
  • Page 3: Vor Gebrauch

    Deutsch VOR GEBRAUCH Entfernen Sie die Isolierung von den Vielen Dank, dass Sie dieses Produkt von PIONEER gekauft haben. Enden der Adern und verdrehen Sie die Lesen Sie bitte aufmerksam die Gebrauchsanweisung, bevor Sie diese Drähte miteinander. Akustikanlage benutzen, damit Sie wissen, wie sie ihre Leistungen optimieren können.
  • Page 4: Före Användning

    Svenska FÖRE ANVÄNDNING Skala av isoleringsremsan i spetsen och Tack för att du valt en produkt från PIONEER. twinna trådarna. Läs bruksanvisningen noggrant innan du använder dessa högtalarlådor, så att du vet hur du skall optimera prestandan. När du läst bruksanvisningen bör du Vrid vingskruven moturs, kontrollera att förvara den så...
  • Page 5: Observaciones Generales

    Si las pantallas acústicas se cuelgan en la pared, para mayor securidad, asegurar las rejillas con accesorios proporcionados. Registre su producto en http://www.pioneer.es (o en http://www.pioneer.eu) Descubra los beneficios de registrarse on-line. http://www.pioneer.es CONEXIONES Desconectar el amplificador (OFF).
  • Page 6: Antes De Utilizar

    Estas colunas são pesadas e frágeis, pelo que é perigoso instalá-las num lugar instável. Se os altifalantes forem pendurados na parede, para maior segurança, fixar as grelhas com acessórios fornecidas. Registe o seu produto em http://www.pioneer.pt (ou em http://www.pioneer.eu). Descubra as vantagens de o fazer agora em linha. http://www.pioneer.pt http://www.pioneer.eu LIGAÇÕES...
  • Page 7: Prima Dell'uso

    Se i diffusori sono appesi sulla parete, per maggiore sicurezza, attaccare i griglie con i accessori forniti. Registra il tuo prodotto su http://www.pioneer.it (o http://www.pioneer.eu) e scopri subito quali vantaggi puoi ottenere! http://www.pioneer.it COLLEGAMENTI http://www.pioneer.eu...
  • Page 8: Voor Het Gebruik

    Indien de luidsprekers zijn ophangen aan de muur, voor alle veiligheid, moeten de sierfrontjes met de bijgeleverde toebehoren bevestigen. Ontdek nu de voordelen van online registratie! Registreer uw Pioneer product via http://www.pioneer.nl - http://www.pioneer.be (of http://www.pioneer.eu) http://www.pioneer.nl - http://www.pioneer.be http://www.pioneer.eu...

Table des Matières