Velleman CAMWH4 Mode D'emploi

CAMWH4 – OUTDOOR CAMERA WITH WHITE LED LIGHT
1. Introduction
At the end of its life cycle, dispose of this product in accordance with local and national disposal
regulations. Read the manual thoroughly before bringing this device into service
Thank you for buying the CAMWH4! If the device was damaged in transit, contact your dealer.
Your CAMWH4 should come with the following:
• Camera + housing
• This manual
• An accessory pack, containing:
screw A x 2 (spare screws to lock the slideable base plate)
screw B x 4 to attach the platforms of the source board and the camera
screw C x 1 to secure the attachment of the lid to the housing
screw D x 1 to connect the ground cable to the housing
screw E x 2 to fix the camera onto the (optional) bracket
1 ring terminal to connect the grounding cable
1 hex key to tighten screws A
1 ring to fit the lens
spare parts to fit an auto iris lens
1 waterproof stopper and cable holder
2. Features
• Highly efficient white LEDs with a lighting distance up to 20m
• High quality video performance
• Extruded aluminium housing
• Intelligent heating/cooling system
• 100~240Vac universal power input
• Anti-thunderbolt design
NOTE: lenses are important for picture quality. Different aperture levels affect the lighting distance and the picture quality.
For example: with a fixed iris f6.0mm/F2.0 lens, the object is identifiable at 15 meters. With a fixed iris f6.0mm/
F1.2 lens, the effective range is 20m. For detailed object identification, use high focal length lenses (e.g. 16.0mm).
3. Structure
A. White LEDs (18) with CDS sensor (A*)
B. Colour CCD camera
C. Heater: when the temperature is 5°C (±5°C), the heater will
be activated. At 15°C (±5°C) it will be switched off.
D. Source board: supplies the power for and contains the built-
in sensor that controls the heater and the cooling fan.
E. Turbofan: when the temperature is 40°C (±5°C), the fan
will be activated. At 30°C (±5°C) it will be switched off.
CAMWH4 1 VELLEMAN