JVC MX-KA3 Manuel D'instructions

Systeme de composants compact
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

COMPACT COMPONENT SYSTEM
SYSTEME DE COMPOSANTS COMPACT
MX-KA3
Consists of CA-MXKA3 and SP-MXKA3
Se compose de CA-MXKA3 et de SP-MXKA3
SP-MXKA3
CA-MXKA3
INSTRUCTIONS
MANUEL D'INSTRUCTIONS
SP-MXKA3
For Customer Use:
Enter below the Model No. and Serial No.
which are located either on the rear, bot-
tom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT1013-002A
[C]

Publicité

Chapitres

Table des Matières
loading

Sommaire des Matières pour JVC MX-KA3

  • Page 1 COMPACT COMPONENT SYSTEM SYSTEME DE COMPOSANTS COMPACT MX-KA3 Consists of CA-MXKA3 and SP-MXKA3 Se compose de CA-MXKA3 et de SP-MXKA3 SP-MXKA3 CA-MXKA3 SP-MXKA3 INSTRUCTIONS MANUEL D’INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear, bot- tom or side of the cabinet.
  • Page 2 Warnings, Cautions and Others / Mises en garde, précautions et indications diverses (For U.S.A) INFORMATION This equipment has been tested and found to com- CAUTION ply with the limits for a Class B digital device, pursu- RISK OF ELECTRIC SHOCK DO NOT OPEN ant to Part 15 of the FCC Rules.
  • Page 3 CLASS 1 LASER PRODUCT PRODUIT LASER CLASSE 1 DANGER: ATTENTION: 1. Invisible laser radiation when open and interlock 1. Radiation laser invisible quand l’appareil est ouvert ou que le failed or defeated. Avoid direct exposure to beam. verrouillage est en panne ou désactivé. Eviter une exposition CAUTION: directe au rayon.
  • Page 4: Features

    ❏ The controls and operations have been redesigned to make them very easy to use, freeing you to just enjoy the music. • With JVC’s COMPU PLAY you can turn on the System and automatically start the Radio, Cassette Deck, or CD Player with a single touch.
  • Page 5: Table Des Matières

    Table of Contents Introduction ........................1 Features..............................1 How This Manual Is Organized....................... 1 IMPORTANT CAUTIONS........................1 Table of Contents ......................2 Getting Started ......................3 Accessories .............................. 3 How To Put Batteries In the Remote Control..................3 Using the Remote Control ........................3 Connecting the FM Antenna........................
  • Page 6: Getting Started

    Getting Started Accessories Make sure that you have all of the following items, which are supplied with the System. AM Loop Antenna (1) Remote Control (1) Batteries (2) FM Wire Antenna (1) If any of these items are missing, contact your dealer immediately. How To Put Batteries In the Remote Control Match the polarity (+ and –) on the batteries with the + and –...
  • Page 7: Connecting The Fm Antenna

    Getting Started CAUTION: • Make all connections before plugging the System into an AC power outlet. Connecting the FM Antenna Using the Supplied Wire Antenna FM wire antenna (supplied) Extend the supplied FM Wire Antenna horizontally. Strip vinyl shield from cut line, twist wire core.
  • Page 8: Connecting The Am Antenna

    Getting Started Connecting the AM Antenna Rear Panel of the Unit AM antenna wire (not supplied) If reception is poor, connect the outside antenna. Turn the loop until you have the best reception. AM loop antenna (Supplied) Attach the AM loop to its base by snapping the tabs on the loop into the slot in the base.
  • Page 9: Connecting External Equipment

    COMPU Play JVC’s COMPU PLAY feature lets you control the most frequently used System functions with a single touch. With One Touch Operation you can play a CD, a tape, turn on the radio, or listen to an external equipment with a single press of the play button for that function.
  • Page 10: Basic Operations

    Basic Operations STANDBY/ON STANDBY/ON SLEEP Display Numeric SOUND MODE keys VOLUME SOUND TURBO FM MODE FM /AM ACTIVE BASS EX. PHONES STANDBY indicator STANDBY/ON REPEAT PROGRAM /RANDOM TAPE TAPE SOUND SOUND VOLUME MODE MODE VOLUME +,– ACTIVE SOUND FADE BASS EX. TURBO MUTING ACTIVE...
  • Page 11: Fade-Out Muting (Fade Muting)

    Basic Operations On the Remote Control Fade-out Muting (FADE MUTING) Press the SOUND MODE button until Sound Mode you want ap- pears on the display. You can mute the output with one touch operation. The Sound Mode indicator that corresponds to the selected sound mode blinks.
  • Page 12: Using The Tuner

    Using the Tuner STANDBY/ON Numeric SLEEP ¢ keys ¡ FM MODE FM /AM FM/AM FM MODE FM/AM REPEAT PROGRAM /RANDOM TAPE TAPE SOUND VOLUME MODE FADE ACTIVE SOUND MUTING BASS EX. TURBO RM-SMXKA6J REMOTE CONTROL Band display, Frequency display, Preset channel FM mode indicators * When the System is in use, the display shows other items as well.
  • Page 13: Presetting Stations

    Using the Tuner CAUTION: • Even if the System is unplugged or if the power • In AM broadcast, reception sensitivity will be changed by turning the AM loop antenna. Turn the AM loop antenna failure occurs, the preset stations will be stored for best reception.
  • Page 14: Using The Cd Player

    Using the CD Player STANDBY/ON REPEAT Numeric PROGRAM keys SLEEP RANDOM CD1-CD3 CD Open/ FM MODE FM /AM Close 0 ¢ DISC SKIP CD1-CD3 CANCEL ¡ REPEAT PROGRAM /RANDOM ¢ TAPE TAPE REPEAT CD 6 PROGRAM SOUND VOLUME /RANDOM MODE ACTIVE SOUND FADE...
  • Page 15: To Load Cds

    Using the CD Player Example of indication: ❏ When you use an 8 cm (3'') CD, place it on the inner circle of the tray. When CD tray has ejected once and then ❏ You can load CDs while listening to the other source or while CD1 is pressed.
  • Page 16: Basics Of Using The Cd Player-Normal Play

    Using the CD Player • Removing/changing the CDs during playback Basics of Using the CD Player- While playing back a CD (e.g. CD1), you can remove or change the other CDs (e.g. CD2 and CD3) by pressing the CD Open/Close Normal Play 0 button.
  • Page 17: Programming The Playing Order Of The Tracks

    Using the CD Player Repeat steps 3 and 4 to program other tracks Programming the Playing Order on the same CD or the other CD. of the Tracks To play the program, Press the CD but- You can program the playing order of the tracks on all the CDs. ton.
  • Page 18: Random Play

    Using the CD Player Random Play Tray Lock Function The tracks of all the CDs will play in no special order when you In order to safely keep the CD in the CD Player, the tray can be use this mode. electronically locked.
  • Page 19: Using The Cassette Deck (Listening To A Tape)

    Using the Cassette Deck (Listening to a Tape) STANDBY/ON SLEEP ¡ FM MODE FM /AM TAPE A/B TAPE 3 ¢ REPEAT PROGRAM /RANDOM 0 EJECT 0 EJECT TAPE TAPE TAPE (Deck A) (Deck B) TAPE A/B SOUND VOLUME MODE FADE ACTIVE SOUND MUTING...
  • Page 20: Using The Cassette Deck (Recording)

    Using the Cassette Deck (Recording) STANDBY/ON REC START/STOP SLEEP CD REC START PROGRAM FM MODE FM /AM DUBBING TAPE A/B 0 EJECT REPEAT PROGRAM /RANDOM (Deck B) TAPE TAPE 0 EJECT TAPE 3 TAPE A/B (Deck A) TAPE SOUND VOLUME MODE ACTIVE SOUND...
  • Page 21: Standard Recording

    Using the Cassette Deck (Recording) Insert a blank or erasable tape into the Deck Standard Recording B and wind past the tape leader. Press the CD REC START button on the Unit. This is the basic method for recording any source. The System also “CD REC”...
  • Page 22: Using An External Equipment

    Using an External Equipment STANDBY/ON SLEEP FM MODE FM /AM REPEAT PROGRAM /RANDOM TAPE TAPE SOUND VOLUME MODE FADE ACTIVE SOUND MUTING BASS EX. TURBO RM-SMXKA6J REMOTE CONTROL Listening to the External Equipment You can listen to the external equipment such as MD recorder, cas- sette deck, or other auxiliary.
  • Page 23: Using The Timers

    Using the Timers STANDBY/ON SLEEP SLEEP ¢ FM MODE FM /AM CLOCK/TIMER REPEAT PROGRAM /RANDOM TAPE TAPE SOUND VOLUME MODE ACTIVE SOUND FADE BASS EX. TURBO MUTING RM-SMXKA6J REMOTE CONTROL SLEEP indicator REC (Recording) Timer indicator Timer indicator DAILY Timer indicator * When the System is in use, the display shows other items as well.
  • Page 24: Setting The Daily Timer

    Using the Timers 2. Press the ¢ or 4 button to set the minute, then press the Setting the Daily Timer SET button. Once you have set the Daily Timer, the timer will be activated at the same time every day. The Timer indicator ( ) and “DAILY”...
  • Page 25: Setting The Rec (Recording) Timer

    Using the Timers Preparation for each music source: Perform the following operation according to the music source you have selected. Then, the System enters Volume Setting • If the System is already on when the timer ON-time mode. comes, the Daily Timer does not work. When selecting TUNER FM or TUNER AM: Press the ¢...
  • Page 26 Using the Timers When the timer ON-time comes: Using the Unit • When the timer ON-time comes, the System automatically You can set the time in the same way as for setting the Daily Tim- turns on. The station you have set is played. The Timer indica- tor ( ) blinks during timer operation.
  • Page 27: Setting The Sleep Timer

    Using the Timers Setting the SLEEP Timer Timer Priority Use the Sleep Timer to turn the System off after a certain number Since each timer can be set independently, you may wonder what of minutes when it is playing. By setting the Sleep Timer, you can happens if the settings overlap.
  • Page 28: Care And Maintenance

    Care And Maintenance Cassette Tapes Handle your CDs and tapes carefully, and they will last a long time. Compact Discs • If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating.
  • Page 29: Troubleshooting

    Troubleshooting • If you are having a problem with your System, check this list for a possible solution before calling for service. • If you cannot solve the problem from the hints given here, or the System has been physically damaged, call a qualified person, such as your dealer, for service.
  • Page 30 • La fonction COMPU PLAY de JVC permet de mettre la chaîne sous tension et d'allumer automatiquement la radio, la platine à cassette ou le lecteur CD en enfonçant une seule touche.
  • Page 31 Table des matières Introduction ........................1 Fonctions ..............................1 Structure du manuel..........................1 PRECAUTIONS IMPORTANTES......................1 Table des matières ......................2 Introduction ........................3 Accessoires .............................. 3 Comment insérer les piles dans la télécommande ................... 3 Utilisation de la télécommande ....................... 3 Raccordement de l'antenne FM ....................... 4 Branchement de l'antenne AM ........................
  • Page 32: Introduction

    Introduction Accessoires Vérifier si vous avez bien reçu tous les éléments suivants, livrés avec la chaîne. Antenne cadre AM (1) Télécommande (1) Piles (2) Fil d'antenne FM (1) Si un de ces éléments devait manquer, contacter immédiatement le revendeur. Comment insérer les piles dans la télécommande Faire correspondre la polarité...
  • Page 33: Raccordement De L'antenne Fm

    Introduction ATTENTION: • Effectuer tous les branchements avant de raccorder la chaîne à une prise secteur. Raccordement de l'antenne FM Utilisation du fil d'antenne livré Fil d'antenne FM (livré) Déployer l'antenne à fil FM fournie à l'horizontale. Dénuder la gaine en vinyle à...
  • Page 34: Branchement De L'antenne Am

    Introduction Branchement de l'antenne AM Dos de l'appareil Fil d'antenne AM (non fourni) Si la réception est mauvaise, rac- corder une antenne externe. Tourner le cadre pour avoir la meilleure réception possible. Antenne cadre AM (fournie) Fixer le cadre AM à son socle en insérant à...
  • Page 35 COMPU PLAY La fonction COMPU PLAY de JVC permet de contrôler les fonctions de la chaîne le plus souvent utilisées en appuyant sur une seule touche. Ces opérations à une touche permettent d'écouter un CD, une cassette, d'allumer la radio ou d'écouter un équipement externe en appuyant simplement sur la touche de lecture correspondant à...
  • Page 36 Opérations de base STANDBY/ON STANDBY/ON SLEEP Affichage Touches SOUND MODE numériques VOLUME FM MODE FM /AM SOUND TURBO ACTIVE BASS EX. PHONES Indicateur de veille STANDBY STANDBY/ON REPEAT PROGRAM /RANDOM TAPE TAPE SOUND SOUND VOLUME MODE MODE VOLUME +,– FADE ACTIVE SOUND BASS EX.
  • Page 37 Opérations de base ROCK Accentue les basses et les hautes fréquenc- Fonction de fondu (FADE MUTING) es. Convient à la musique acoustique. Convient à la musique vocale. CLASSIC Convient pour les chaînes stéréo dy- Vous pouvez assourdir la diffusion sonore par le biais d'une opéra- namiques et à...
  • Page 38 Utilisation du tuner STANDBY/ON Touches SLEEP numériques ¢ ¡ FM MODE FM /AM FM/AM SET (PRO- FM MODE GRAMMER) FM/AM REPEAT PROGRAM /RANDOM TAPE TAPE SOUND VOLUME MODE FADE ACTIVE SOUND MUTING BASS EX. TURBO RM-SMXKA6J REMOTE CONTROL Affichage de bande, affichage de fréquence, station présélectionnée Indicateurs du mode FM * Lors de l'utilisation de la chaîne, l'affichage indique également d'autres informations.
  • Page 39 Utilisation du tuner ATTENTION: • Même si la chaîne est débranchée ou en cas de • En mode d'émission AM, vous pouvez changer la sensi- bilité de la réception en tournant l'antenne cadre AM. coupure de courant, les stations restent plu- Tourner l'antenne cadre AM de manière à...
  • Page 40 Utilisation du lecteur CD STANDBY/ON REPEAT Touches PROGRAM numériques SLEEP RANDOM CD1-CD3 Ouvrir/fermer FM MODE FM /AM tiroir CD 0 ¢ DISK SKIP CD1-CD3 CANCEL ¡ ¢ REPEAT PROGRAM /RANDOM TAPE TAPE REPEAT CD 6 PROGRAM SOUND VOLUME MODE /RANDOM FADE ACTIVE SOUND...
  • Page 41 Utilisation du lecteur CD Exemple d'indication: Lorsque la plateau du tiroir CD a éjecté le CD puis que vous avez appuyé sur CD1. (Le DISQUE1 est sélectionné) • Lorsque vous placez un disque dans le tiroir, assurez- Indique que ce numéro de disque est sélectionné. vous que celui-ci est correctement positionné...
  • Page 42 Utilisation du lecteur CD • Retrait/changement de CD pendant la lecture Notions de base pour l'utilisation Pendant la lecture d'un CD (par ex. CD1), vous pouvez retirer ou changer les autres CD (par ex. CD2 et CD3) en réappuyant sur la du lecteur CD - Lecture normale touche CD Ouvrir/Fermer 0.
  • Page 43 Utilisation du lecteur CD Répéter les opérations 3 et 4 pour program- Programmation de l'ordre de mer d'autres plages du même CD ou d'un lecture des plages autre CD. Vous pouvez programmer l'ordre de lecture des plages sur tous les Pour écouter le programme, appuyer sur la CD.
  • Page 44 Utilisation du lecteur CD Lecture aléatoire Fonction de verrouillage du tiroir Lorsque vous utilisez ce mode, vous écouterez les plages du CD Afin de pouvoir conserver en toute sécurité les CD dans le lecteur, dans n'importe quel ordre. il est possible de verrouiller le tiroir de manière électronique. •...
  • Page 45 Utilisation de la platine à cassette (écoute d'une cassette) STANDBY/ON SLEEP ¡ FM MODE FM /AM TAPE A/B ¢ TAPE 3 REPEAT PROGRAM /RANDOM TAPE 0 EJECT 0 EJECT TAPE TAPE (Platine A) (Platine B) TAPE A/B SOUND VOLUME MODE FADE ACTIVE SOUND...
  • Page 46 Utilisation de la platine à cassette (enregistrement) STANDBY/ON SLEEP REC START/STOP PROGRAM CD REC START FM MODE FM /AM DUBBING TAPE A/B 0 EJECT REPEAT PROGRAM /RANDOM (Platine B) TAPE TAPE 0 EJECT TAPE 3 TAPE A/B (Platine A) TAPE SOUND VOLUME MODE...
  • Page 47 Utilisation de la platine à cassette (enregistrement) • Si vous ne voulez enregistrer qu'un seul CD, vous n'avez Enregistrement normal besoin de charger qu'un seul CD. Insérer une cassette vierge ou effaçable Il s'agit de la méthode de base pour enregistrer n'importe quelle source. La dans la platine B et bobiner l'amorce.
  • Page 48: Branchement D'équipements Externes

    Branchement d'équipements externes STANDBY/ON SLEEP FM MODE FM /AM REPEAT PROGRAM /RANDOM TAPE TAPE SOUND VOLUME MODE ACTIVE SOUND FADE BASS EX. TURBO MUTING RM-SMXKA6J REMOTE CONTROL Ecoute d'équipements externes Vous pouvez écouter des équipements externes comme un enreg- istreur MD, une platine à cassette ou d'autres auxiliaires. ❏...
  • Page 49: Utilisation Des Minuteries

    Utilisation des minuteries STANDBY/ON SLEEP SLEEP ¢ FM MODE FM /AM CLOCK/TIMER REPEAT PROGRAM /RANDOM TAPE TAPE SOUND VOLUME MODE FADE ACTIVE SOUND MUTING BASS EX. TURBO RM-SMXKA6J REMOTE CONTROL Indicateur SLEEP (BONSOIR) Indicateur de minuterie REC (Enregistrement) Indicateur de la minuterie Indicateur de minuterie DAILY (QUOTIDIENNE) * Lors de l'utilisation de la chaîne, l'affichage indique également d'autres informations.
  • Page 50: Réglage De La Minuterie Quotidienne

    Utilisation des minuteries 2. Appuyer sur les touches ¢ ou 4 pour régler les minutes Réglage de la minuterie quotidienne puis appuyer sur SET. Une fois que vous avez programmé la minuterie quotidienne, celle-ci se met en marche tous les jours à la même heure. L'indicateur de la minuterie ( ) et l'indicateur “DAILY”...
  • Page 51: Programmation De La Minuterie Rec (Enregistrement)

    Utilisation des minuteries Préparation pour chaque source de musique: Effectuer l'opération suivante en fonction de la source de mu- sique sélectionnée. La chaîne se met ensuite en mode de • Si la chaîne est déjà sous tension lorsque l'heure d'activa- réglage du volume.
  • Page 52 Utilisation des minuteries Lorsque l'heure d'activation est atteinte: Sur l'appareil • Lorsque l'heure d'activation est atteinte, la chaîne se met Vous pouvez programmer l'heure comme pour la minuterie quotidienne. automatiquement sous tension. Vous entendez alors la station Insérer une cassette vierge ou effaçable dans programmée.
  • Page 53: Programmation De La Minuterie Sleep

    Utilisation des minuteries Programmation de la minuterie Priorité des minuteries SLEEP Etant donné que vous pouvez programmer chacune des minuteries séparément, vous pouvez vous demander ce qui se passera en cas Utiliser la minuterie Bonsoir pour éteindre la chaîne après un cer- de chevauchement des réglages.
  • Page 54: Nettoyage Et Entretien

    Nettoyage et entretien Cassettes Manipuler vos CD et vos cassettes avec grand soin, pour qu'ils du- rent plus longtemps. Disques compacts • Si la bande n'est pas suffisamment ten- due dans la cassette, retendez-la en fai- sant tourner un crayon inséré dans un •...
  • Page 55: Guide De Dépannage

    Guide de dépannage • Si vous avez des problèmes avec votre chaîne, vérifier la liste ci-dessous en vue d'y trouver une solution éventuelle avant d'appeler le service technique. • Si vous ne parvenez pas à résoudre les problèmes après avoir examiné les conseils donnés ou si la chaîne est physiquement endom- magée, appeler du personnel qualifié, comme votre revendeur, pour une intervention technique.
  • Page 56 © 2003 VICTOR COMPANY OF JAPAN, LIMITED EN, FR 0103NYMCREBET...

Ce manuel est également adapté pour:

Ca-mxka3Sp-mxka3

Table des Matières