Lubrication - Akrapovic Slip-On Instructions D'installation

www.akrapovic.com
SYMBOLS
The following symbols are used throughout these installation instructions:
TOOLS AND PROTECTIVE
EQUIPMENT REQUIRED

LUBRICATION

INSTALLATION TIP
USE BOLT SEALANT
Apply 3 to 4 small drops of bolt sealant onto the cleaned and degreased threads before tightening the
bolts.
WARNING! Avoid contact with skin, eyes and mucous membranes. Do not inhale fumes. Keep
out of reach of children.
USE ANTI-SEIZE LEAD-FREE COPPER PASTE (black tube)
Provides trouble-free and long-lasting protection against seizing, corrosion and rusting of bolts,
threaded ends, nuts, joints, etc. Also protects against vibration, wear and impact.
WARNING! Avoid eye contact. Avoid excessive skin contact. Keep out of reach of children.
USE ANTI-SEIZING GREASE (white tube)
Prevents seizing, corrosion and excessive wear between the titanium components of your exhaust
system.
WARNING! Avoid eye contact. Avoid excessive skin contact. Keep out of reach of children.
TIGHTENING TORQUE
HAND TIGHTEN
IMPORTANT / CAUTION
Tools & equipment
• Mechanic gloves
• T-handle 3 mm three hexagon wrench
• T-handle 5 mm three hexagon wrench
• T-handle 10 mm wrench
• T-handle 12 mm wrench
• Combination 12 mm wrench
• Combination 13 mm wrench
• Spring puller
• Torx 45 wrench
6 / 16