Publicité

Liens rapides

Getting Started
Démarrage
Inbetriebnahme
Guida Rapida
Make sure to read this manual before using the machine. Please keep it in hand for future reference.
Veillez à lire ce manuel avant d'utiliser la machine. Conservez-le à portée de main afin de pouvoir vous y reporter ultérieurement.
Bitte lesen Sie dieses Handbuch vor der Verwendung des Geräts. Bewahren Sie es so auf, dass Sie es bei Bedarf zur Hand haben.
Leggere questo manuale prima di utilizzare la stampante. Tenerlo a portato di mano per consultarlo all'occorrenza.
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO

Publicité

Table des Matières
loading

Sommaire des Matières pour Canon PIXMA MG6150

  • Page 1 ENGLISH FRANÇAIS DEUTSCH ITALIANO Getting Started Démarrage Inbetriebnahme Guida Rapida Make sure to read this manual before using the machine. Please keep it in hand for future reference. Veillez à lire ce manuel avant d’utiliser la machine. Conservez-le à portée de main afin de pouvoir vous y reporter ultérieurement. Bitte lesen Sie dieses Handbuch vor der Verwendung des Geräts.
  • Page 2: Symbols Used In This Document

    ■ Symbols Used in This ■ Symboles utilisés dans ce ■ In diesem Dokument ■ Simboli utilizzati in questo Document document verwendete Symbole documento Prohibited actions. Actions interdites. Unzulässige Aktionen. Azioni proibite. Instructions including important Instructions comportant des Anweisungen, die wichtige Istruzioni che includono information.
  • Page 3: F E Hl Erbe He Bungshan Dbu Ch

    On-screen manuals can be viewed on a computer. They are included on the Setup CD-ROM and are installed during the software installation. For some languages parts of the manual may be displayed in English. For details on opening the on-screen manuals, refer to page 68. Les manuels en ligne peuvent être visualisés sur un ordinateur.
  • Page 4 ■ Contents ■ Sommaire ■ Inhalt ■ Sommario 1 Vorbereitung S. 5 1 Preparation P.5 1 Préparation P.5 1 Preparazione P.5 2 Install the Print Head P.10 2 Installation de la tête d’impression P.10 2 Einbauen des Druckkopfs S. 10 2 Installazione della testina di stampa P.10 3 Install the Ink Tanks P.14 3 Installation des cartouches d’encre P.14...
  • Page 5 ■ Machine Installation Network Connection Flow USB Connection Connexion réseau ■ Procédure d’installa- Netzwerkverbindung Connexion USB tion de la machine Connessione di rete ■ Ablauf der Installation Wireless Connection Wired Connection Using from Additional USB-Verbindung des Geräts Connexion sans fil Connexion filaire Computers (when the machine is already...
  • Page 6 ■ Devices Required for Wireless/Wired Connection ■ Périphériques requis pour une connexion sans fil/filaire ■ Erforderliche Geräte für drahtlose/Kabelverbindung ■ Dispositivi necessari per la connessione wireless/cablata When using the machine over a wireless/wired connection, the following devices are required depending on the connection method. Lorsque vous utilisez la machine via une connexion sans fil/filaire, les dispositifs suivants sont requis selon la méthode de connexion.
  • Page 7 Remove all orange tape and protective materials from the inside and • Do not install the machine where an object may fall on it. In addition, outside of the machine. do not place any object on the top of the machine. It may fall into the machine when opening covers, resulting in malfunction.
  • Page 8 Make sure all the following items are supplied. Some accessories (1) are stored within the Paper Output Tray (A). Open the Paper Output Tray to remove them. 1. Print Head 6. Power cord • A USB cable is necessary to connect the machine with 2.
  • Page 9 Insert the power cord into the connector on the left side at the back of the Press the LCD open button (C) (1), then adjust Press the ON button (E). machine and into the wall outlet firmly. the LCD (Liquid Crystal Display) (D) to a comfortable viewing angle (2).
  • Page 10 Use the { or } button (F) on the Operation Panel to select the language for the When the above screen is displayed, touch the OK button and go to the next step. LCD, then touch the OK button. • If an unintended language is displayed on the LCD, touch the Back button (G) to return to the Language selection screen.
  • Page 11 When it is necessary to turn off the machine Lorsqu’il est nécessaire de mettre la machine hors tension Wenn das Gerät ausgeschaltet werden muss Se è necessario spegnere la stampante Be sure to follow the procedure below. • When removing the power plug, make sure that the POWER lamp is not lit before removing 1.
  • Page 12 Lift the Scanning Unit (Cover) (A) until it stops. Close the Document Cover (B) and lift it with the Scanning Unit (Cover). Soulevez l’unité de numérisation (capot) (A) jusqu’à ce qu’elle se bloque. Fermez le couvercle du scanner (B) et soulevez-le en même temps que l’unité de numérisation (capot). Heben Sie das Scan-Modul (Abdeckung) (A) vollständig an.
  • Page 13 The Print Head Holder (C) moves to the installation position. Firmly lift the part (D) of the Print Head Lock Lever in the Print Head Holder until it stops. If the Print Head Holder does not move, make sure that the machine is turned on. The Print Head Lock Lever may feel heavy.
  • Page 14 Remove the Print Head from the silver package. Remove the orange protective cap. • Handle the Print Head carefully. Do not drop or apply excessive pressure to it. • Do not touch the inside (F) or metal parts (G) of the Print Head. The machine may not print properly if you touch them. •...
  • Page 15 Tilt the Print Head forward and set it in place as shown. Hold the Print Head Lock Lever firmly and lower it completely. • Do not knock the Print Head against the sides of the holder. • Install in a well-lit environment. •...
  • Page 16 1. Remove the orange tape completely. Hold the ink tank with the orange protective cap (A) pointing up while being careful not to block the L-shape air hole (B). 2. Remove the protective film completely. • Handle the ink tanks carefully. Do not drop or apply excessive pressure to them. •...
  • Page 17 Hold the ink tank by its sides and slowly twist the orange protective cap 90 Tilt the ink tank, then insert it under the label and against the back end of the slot. degrees horizontally to remove it off. Make sure that the color of the label matches the ink tank. Do not push the sides of the ink tank.
  • Page 18 Press the PUSH mark on the ink tank firmly until it Install all the other ink tanks in the same way according to the color order indicated on the label. clicks. When the installation is completed properly, the Ink lamp lights red. Make sure all the Ink lamps light red.
  • Page 19 Make sure that the LCD changes as shown in the illustration and go to the next step. Close the Scanning Unit (Cover) (E). Make sure the Inner Cover (F) is closed. Do not touch the OK button yet. • It takes about 5 minutes before the LCD changes. •...
  • Page 20 Prepare the Paper Support (A). Move the Paper Guides Load a sheet of supplied specialty paper (Matte Photo Paper MP-101) (B) to both edges. in the Rear Tray (C). 1. Open it. Load paper in portrait orientation so that the cut corner (D) is at the top right. 2.
  • Page 21 Slide the left and right Make sure the Paper Touch the OK button. When the pattern is printed, remove the Confirm the above message, Paper Guides against Output Tray (E) is open, printed paper. then go to the next step. both edges of the paper.
  • Page 22: Papier Ordinaire

    With the machine, the paper source varies depending on the media type. Avec la machine, la source du papier varie en fonction du type de support. Die Papierquelle des Geräts richtet sich nach dem verwendeten Medientyp. Con la stampante, l'alimentazione della carta varia in base al tipo di supporto. Specialty paper including photo paper Plain paper Load paper in the Rear Tray (A).
  • Page 23 □ How to load specialty paper in the Rear Tray □ Comment charger le papier spécial dans le réceptacle arrière □ Einlegen von Spezialpapier in das hintere Fach □ Modalità di caricamento della carta speciale nel vassoio posteriore This section describes how to load plain paper in the Cassette. For details on how to load specialty paper in the Rear Tray, refer to in “4 Align the Print Head”...
  • Page 24 Move the left Paper Guide (G) to the edge. Slide the front Paper Guide (H) to align with the actual Load plain paper. size of the paper. Load paper with the printing side facing down. The front Paper Guide will click and stop when it aligns with the corresponding mark of paper size.
  • Page 25 Align the paper to the right side of the Cassette Insert the Cassette slowly into the (1), and slide the left Paper Guide completely machine until it clicks into place. against the left edge of the paper (2). Make sure that the height of the paper stack does not exceed the line (I).
  • Page 26 Intended Use Connection Method Utilisation prévue Méthode de connexion Verwendungszweck Verbindungsmethode Utilizzo desiderato Metodo di connessione • Want to connect to a computer with a USB cable. USB Connection Go to "7 Install the Software (USB Connection)" on page 26. •...
  • Page 27 What is Network? If it is uncertain whether your device (access point, router, etc.) supports wireless connection or wired connection, refer to the manual supplied with the device, or contact its manufacturer. A system to exchange information between computers by connecting them to each other with cables or via wireless communication.
  • Page 28 Do not connect the USB cable yet. Ne branchez pas encore le câble USB. Schließen Sie das USB-Kabel noch nicht an. Non collegare ancora il cavo USB. • To use the machine by connecting it to a computer, software including the drivers •...
  • Page 29 □ If you connect the machine via USB cable before installing the software: □ Easy-WebPrint EX □ Si vous connectez la machine avec un câble USB avant d’installer le logiciel : □ Easy-WebPrint EX □ Wenn Sie vor der Installation der Software das Gerät mit einem USB-Kabel anschließen: □...
  • Page 30 Press the ON button (A) to TURN OFF THE MACHINE. Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive. Operating noise may continue for up to 25 seconds until the machine turns off. If you are using Windows, the setup program starts automatically. For Windows •...
  • Page 31: Windows 7/Windows Vista

    Windows 7/Windows Vista Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Continue on the User Account Control dialog box. Windows XP If the User Account Control dialog box reappears in following steps, click Yes or Continue. Cliquez sur Exécuter Msetup4.exe (Run Msetup4.exe) dans l’écran Exécution automatique (AutoPlay), puis cliquez sur Oui (Yes) ou Continuer (Continue) dans la boîte de dialogue Contrôle de compte d’utilisateur (User Account Control).
  • Page 32 Select your place of residence, then click Next. Select a country or region, then click Next. Click Easy Install. The drivers, application software, and on-screen manuals are installed. • If the Select Language screen appears, select a language, then click Next. •...
  • Page 33 □ USB Port □ Port USB □ USB-Anschluss □ Porta USB When the Printer Connection screen appears, connect the machine to the computer with a USB cable. After connecting the cable, TURN ON THE MACHINE. The USB Port is located on the right side at the back of the machine. The lower port is for USB.
  • Page 34 □ Necessary Information for the User Registration □ If the Extended Survey Program screen appears □ Informations nécessaires pour l’enregistrement utilisateur □ Si l’écran Extended Survey Program apparaît □ Erforderliche Informationen für die Benutzerregistrierung (User Registration) □ Informazioni necessarie per la Registrazione utente (User Registration) □...
  • Page 35 EX may vary depending on the country or region of purchase. For Macintosh Solution Menu EX starts when clicking OK in the Canon Solution Menu EX dialog. Remove the Setup CD-ROM and keep it in a safe place. Sous Windows Click Exit to complete the installation.
  • Page 36 Congratulations! Setup is complete. Proceed to page 68 for information regarding the Solution Menu EX Installing the XPS Printer Driver and the on-screen manual or In Windows 7 and Windows Vista SP1 or later, the XPS page 70 to start using the machine. Printer Driver can be installed additionally.
  • Page 37 Before connecting the machine to the network, make sure that the computer and access point or router is connected. Access point or wireless router, etc. Point d’accès ou routeur sans fil, etc. Avant de brancher la machine au réseau, vérifiez que Zugriffspunkt oder l’ordinateur et le point d’accès ou le routeur sont connectés.
  • Page 38 ■ Notes on Wireless Connection ■ Remarques relatives à la connexion sans fil If you choose one of these connection methods, skip the “Easy Setup” section and proceed the desired section (WPS (Wi-Fi Protected Setup) or WCN (Windows Connect Now)). ■...
  • Page 39 ■ Check the Information for Wireless Connection ■ Vérification des informations requises pour la connexion sans fil ■ Überprüfen der Informationen für die drahtlose Verbindung ■ Verifica delle informazioni per la connessione wireless In most cases, “Easy Setup” will be used to connect the machine to your access point or router. Before you continue, you must gather the information below which will be required during the installation.
  • Page 40 For details on how to check the following information, refer to the manual of your access point or router, or contact its manufacturer. Pour plus de détails sur la vérification des informations suivantes, reportez-vous manuel de votre point d’accès ou routeur, ou contactez le fabricant. Weitere Einzelheiten zum Überprüfen der folgenden Informationen finden Sie im Handbuch des Zugriffspunkts oder Routers, oder wenden Sie sich an den Hersteller.
  • Page 41 Select Yes, then touch the OK button. Use the { or } button (A) to display Setup, then Use the [ or ] button (C) to select Wireless LAN touch the right FUNCTION button (B). setup, then touch the OK button. When wireless connection is enabled, the Wi-Fi lamp (D) lights blue.
  • Page 42 Select Easy setup, then touch the OK Select the access point name you wrote down on Make sure that one of the above screens is displayed, then touch button. page 38, then touch the OK button. the right FUNCTION button. If the above screen is not displayed, go to on page 41.
  • Page 43 When the above screen appears, touch the OK button. If Failed to connect to the access point. appears, touch the OK button, • make sure that the network key is correct, then enter it again. If a connection still cannot be established, refer to the printed manual: Network Setup Troubleshooting.
  • Page 44 Read this section only when setting up a wireless connection by using the WPS (Wi-Fi Protected Setup). Lisez cette section uniquement si vous souhaitez configurer une connexion sans fil à l’aide de WPS (Wi-Fi Protected Setup). Use the { or } button (A) to display Setup, Use the [ or ] button Select Yes, then touch the OK button.
  • Page 45 Select Push button method, then touch the OK Touch the OK button. button. To use the PIN code method for setup, select PIN code method in , then touch the OK button. Follow the on-screen instructions • to operate the machine and access point. When the screen in appears, touch the OK button.
  • Page 46 Press and hold the WPS button on the access point (for about When the above screen appears, touch the OK button. 5 seconds), then touch the OK button on the machine within Next, read “10 Install 2 minutes. the Software (Network •...
  • Page 47 The machine supports “WCN-UFD”. 3. Select Copy this network profile to a USB flash drive. • Canon assumes no responsibility for any damage or loss of data stored on your USB flash drive regardless of the cause even within the warranty period. •...
  • Page 48: Windows Vista

    Windows Vista 1. From the Start menu of the Windows side, select Network, then click Add a wireless device on the menu. 2. Click I want to add a wireless device or computer that is not on the list, using a USB flash drive. 3.
  • Page 49 Before connecting the machine to the network, make sure that the computer and router is connected. Avant de brancher la machine au réseau, vérifiez que l’ordinateur et le routeur sont connectés. Bevor Sie das Gerät an das Netzwerk anschließen, stellen Sie sicher, dass der Computer und der Router angeschlossen sind.
  • Page 50 ■ Notes on Wired Connection ■ Remarques relatives à la connexion filaire ■ Hinweise zu Kabelverbindungen ■ Note sulla connessione cablata • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details, refer to your device's instruction manual or contact its manufacturer.
  • Page 51 Remove the Cap (A), then connect a network device (router, etc.) with an Ethernet cable (B). Retirez le capuchon (A), puis connectez un périphérique réseau (routeur, etc.) Use the { or } button (C) to display Use the [ or ] button (E) to select à...
  • Page 52 Select LAN settings, then touch the Select Change wireless/wired, then Select Wired LAN active, touch the OK button. OK button. touch the OK button. Next, read "10 Install the Software (Network Connection)" on page 51! Sélectionnez Paramètres réseau (LAN Sélectionnez Changer sans fil/câblé Sélectionnez Réseau câblé...
  • Page 53 If the firewall function of your security software is turned on, a warning L’installation reprend après le redémarrage de votre ordinateur. message may appear that Canon software is attempting to access the network. If such a warning message appears, set the security software •...
  • Page 54 □ Easy-WebPrint EX □ Easy-WebPrint EX □ Easy-WebPrint EX □ Easy-WebPrint EX Easy-WebPrint EX is Web print software that is installed on the computer when installing the supplied software. Internet Explorer 7 or later is required to use this software. An Internet connection is required for installation.
  • Page 55 Windows 7/Windows Vista Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Continue on the User Account Control dialog box. Windows XP If the User Account Control dialog box reappears in following steps, click Yes or Continue. Cliquez sur Exécuter Msetup4.exe (Run Msetup4.exe) dans l’écran Exécution automatique (AutoPlay), puis cliquez sur Oui (Yes) ou Continuer (Continue) dans la boîte de dialogue Contrôle de compte d’utilisateur (User Account Control).
  • Page 56 Click Easy Install. Select your place of residence, then click Next. Select a country or region, then click Next. The drivers, application software, and on-screen manuals are • If the Select Language screen appears, select installed. a language, then click Next. •...
  • Page 57 Click Install. Select Use the printer on network, then click Next. Follow any on-screen instructions to proceed with the software installation. Cliquez sur Installer (Install). Sélectionnez Utiliser l’imprimante sur le réseau (Use the printer on network), puis cliquez sur Suivant (Next). Pour poursuivre l’installation du logiciel, suivez les instructions à...
  • Page 58 When the Printer Detection screen appears, click Next. • If the Printer Connection screen appears instead of the screen above, the connection method is not correctly selected in − For Windows Click Cancel and start again from , then be sure to select Use the printer on network in −...
  • Page 59 When the Detected Printers List dialog box appears, select Canon MG6100 series, then click Next. • If the machine is not detected, Check Printer Settings dialog box is displayed. Refer to the printed manual: Network Setup Troubleshooting. Make sure there is no problem, then click Next again on the screen in Lorsque la boîte de dialogue Liste des imprimantes détectées (Detected Printers List) apparaît,...
  • Page 60 When the Setup Completion dialog box appears, click Complete. Next, read “Information” on page 63! Lorsque la boîte de dialogue Fin de l’installation (Setup Completion) apparaît, cliquez sur Terminer (Complete). Lisez ensuite « Informations » à la page 63. Wenn das Dialogfeld Setup abgeschlossen (Setup Completion) angezeigt wird, klicken Sie auf Abgeschlossen (Complete).
  • Page 61 Wechseln Sie zu – auf Seite 60. • I caratteri alfanumerici dopo Canon M6100 series rappresentano il nome di servizio Bonjour o l'indirizzo MAC della stampante. Quando viene visualizzata la finestra di dialogo Registra • Se la stampante non è stata rilevata, verificare quando segue.
  • Page 62 Mac OS X v.10.6.x/v.10.5.x Mac OS X v.10.4.11 – Mac OS X v.10.4.11 Select Canon MG6100 series canonijnetwork and click Add. When the Printer List window appears, click Add. Go to on page 61. • When the You have no printers available.
  • Page 63 Select Canon IJ Network in the pop-up Make sure that Canon MG6100 series is added to menu, select Canon MG6100 series in the list of printers. the list of printers, then click Add. Go to When the Register Printer and Scanner screen appears, click Register Scanner.
  • Page 64 Select Canon MG6100 series on the Scan-from-PC Click Next on the Register Printer and Scanner Settings screen, then click OK. screen. Next, read “Information” on page 63! Sélectionnez Canon MG6100 series dans l’écran Cliquez sur Suivant (Next) sur l’écran Enregistrement Paramètres de numérisation à...
  • Page 65 □ Necessary Information for the User Registration □ Informations nécessaires pour l’enregistrement utilisateur □ Erforderliche Informationen für die Benutzerregistrierung (User Registration) □ Informazioni necessarie per la registrazione utente (User Registration) When the serial number • If the power is on, the Print Head Holder will is not displayed on move when the Scanning Unit (Cover) (A) is the registration screen...
  • Page 66 □ If the Extended Survey Program screen appears □ Si l’écran Extended Survey Program apparaît □ Wenn das Fenster für das Extended Survey Program angezeigt wird □ Se viene visualizzata la schermata Extended Survey Program Click Exit to complete the installation. For Macintosh It is necessary to restart the computer before scanning using the Operation Panel on the machine for the first time.
  • Page 67 The buttons displayed on Solution Menu EX may vary depending on the country or region Solution Menu EX starts. of purchase. For Macintosh Solution Menu EX starts when clicking OK in the Canon Solution Menu EX dialog. Remove the Setup CD-ROM and keep it in a safe place. Sous Windows •...
  • Page 68 Using the Machine from Additional Computers Congratulations! Setup is Now that the wireless/wired connection of the machine is complete, it can be used from additional computers on the same network. complete. Install software including the drivers on the computer from which you want to use the machine. Other settings are not required. Proceed to page 68 for To add computers from which to use the machine, go to “11 Use from Additional Computers”...
  • Page 69: Pour Utiliser La Machine Sur D'autres Ordinateurs

    If the machine is already connected to a wireless/wired connection, it can be used from additional computers on the same network. Si la machine est déjà reliée à une connexion sans fil/filaire, vous pourrez l’utiliser sur d’autres ordinateurs du même réseau. Ist das Gerät bereits mit einem drahtlosen/drahtgebundenen Netzwerk verbunden, kann es von weiteren Computern im selben Netzwerk genutzt werden.
  • Page 70 Solution Menu EX Use the Operation Panel on the machine to print your own items easily. Various application software are installed on the computer along Solution Menu EX is a gateway to functions and information that allow you to make full with the drivers.
  • Page 71 Easy-WebPrint EX For details on Solution Menu EX and Easy-WebPrint EX, refer to the on- screen manual: Basic Guide. Use Easy-WebPrint EX to print web pages in Internet Explorer easily. Some of its features include: • Printing a web page by reducing its size to fit the paper width automatically without cropping edges. •...
  • Page 72 Supported Memory Cards (Adapter required for Corresponding Card Card Slot Location Slot You can also print from USB Emplacement de carte Position de l’emplacement Cartes mémoire prises en charge (Adaptateur nécessaire pour flash drives. For correspondant de carte details, refer to "Printing Photos"...
  • Page 73: Inserting A Memory Card

    □ Inserting a Memory Card □ Insertion d’une carte mémoire □ Einsetzen einer Speicherkarte □ Inserimento di una scheda di memoria Load 10 x 15 cm (4" x 6") photo paper in the Rear Tray (C) in While the HOME screen appears, open the Card Slot Cover, •...
  • Page 74 After printing, open the Card Slot Cover, pinch the 1. Trace along the Scroll Wheel (F) to display a photo to print. memory card and pull it straight out. For more information on printing 2. Touch the [+] or [-] button to specify the number of copies. from a memory card, refer to "Printing Photos"...
  • Page 75 Load A4 or Letter-sized plain 1. Open the Paper Output Tray (B). Place the document face-down and align it with the paper into the Cassette (A). Alignment Mark (E). 2. Open the Output Tray Extension (C). 3. Open the Document Cover (D). •...
  • Page 76 1. Close the Document Cover. For the procedure to copy on paper 2. Touch the HOME button (G) to display Copy on the HOME screen. other than plain paper, refer to 3. Touch the left FUNCTION button (H). "Copying" in the on-screen manual: 4.
  • Page 77 Load 10 x 15 cm (4" x 6") photo paper in the Rear Tray (A) in portrait orientation with the Start Solution Menu EX from the Canon Solution printing side facing up. Menu EX icon on the desktop (Windows) or on the Dock (Macintosh), click Photo Print, then click Photo Make sure that the Paper Output Tray (B) is open.
  • Page 78 Select the image you want to print, then click Layout/Print. Click Print. If you are using Windows, printing will start. If you are using Macintosh, click Print on the Print dialog box to start printing. When a photo is selected, the number of copies is set to "1". For more information, refer to the on-screen manual: Advanced Guide.
  • Page 79 XGA 1024 x 768 (for Borderless Printing: 216 mm/8.5 inches) Wireless LAN • Easy-PhotoPrint Pro is a software plug-in for Canon Digital Photo Operating environment Supported Standards: IEEE802.11n/IEEE802.11g/IEEE802.11b Professional Ver. 2.1 or later, Adobe Photoshop CS4, CS3, CS2, CS and Temperature: 5 to 35°C (41 to 95°F)
  • Page 80 Windows : désinstallez les logiciels fournis avec l’imprimante à jet d’encre Humidité : 5 à 95 % d’humidité relative (sans condensation) IEEE802.11n : 150 Mbits/s max. Canon avant de mettre à niveau Windows Vista vers Windows 7, puis Alimentation IEEE802.11g : 54 Mbits/s max.
  • Page 81 XGA 1024 x 768 (für randlosen Druck: 216 mm/8,5 Zoll) WLAN • Easy-PhotoPrint Pro ist ein Software-Plugin für Canon Digital Photo Betriebsbedingungen Unterstützte Standards: IEEE802.11n/IEEE802.11g/IEEE802.11b Professional Version 2.1 oder höher, Adobe Photoshop CS4, CS3, CS2 oder Temperatur: 5 bis 35 °C (41 bis 95 °F) Frequenzbandbreite: 2,4 GHz CS und Adobe Photoshop Elements 6, 7* und 8.
  • Page 82 XGA 1024 x 768 Ambiente operativo Wireless LAN • Easy-PhotoPrint Pro è un plugin per Canon Digital Photo Professional Temperatura: tra 5°C e 35°C (tra 41°F e 95°F) Standard supportati: IEEE802.11n/IEEE802.11g/IEEE802.11b versione 2.1 o successiva, Adobe Photoshop CS4, CS3, CS2, CS e Adobe Umidità: 10 –...
  • Page 83 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON EUROPA N.V. Bovenkerkerweg 59-61 1185 XB Amstelveen The Netherlands www.canon-europe.com CANON AUSTRALIA PTY LTD 1 Thomas Holt Drive, North Ryde, Sydney N.S.W. 2113, Australia The following ink tanks are compatible with this machine. canon.com.au Les cartouches d’encre suivantes sont compatibles avec cette machine.

Table des Matières