Safety Instructions; Risk Of Electric Shock - SilverCrest SSMS 600 E6 Mode D'emploi

We recommend the following operating times:
Allow the hand blender 5 to cool down for around 2 minutes after 1 minute of
operation.
Let the liquidiser cool down for around 2 minutes after 1 minute of operation.
Allow the whisk q to cool down for around 10 minutes after 3 minutes of operation.
If you exceed these operating times, the appliance can overheat and be damaged!

Safety instructions

RISK OF ELECTRIC SHOCK

Connect the appliance only to mains power sockets supplying
►
a mains power voltage of 220 – 240 V ∼, 50 – 60 Hz.
Remove the plug from the mains power socket in event of
►
operating malfunctions and before cleaning the appliance.
Do not expose the appliance to moisture and do not use it
►
outdoors.
If liquid gets into the housing, disconnect the appliance from
►
the mains power socket immediately and have it repaired by
a qualified technician.
Always pull on the plug to disconnect the appliance from the
►
mains; never pull on the power cable itself.
Do not kink or crush the power cable, and route the cable so
►
that it cannot be stepped on or tripped over.
To prevent accidents, have defective plugs and/or power
►
cables replaced immediately by an authorised specialist, or
our Customer Service or a similarly qualified person.
This appliance may be used by people with reduced physical,
►
sensory or mental capabilities or lack of experience and/or
knowledge if they are supervised and have been instructed
in how to use the appliance safely and have understood the
potential risks.
The appliance and its connecting cable must be kept away
►
from children.
SSMS 600 E6
GB │ IE │
5 ■