Assembling; To Assemble The Hand Blender; Assembling The Wire Whisk; Assembling The Shredder - SilverCrest SSMS 600 E6 Mode D'emploi

Assembling

WARNING! RISK OF INJURY!
► Only insert the plug into the power socket after you have assembled the
appliance for use.
NOTICE
► Before the first use, clean all parts as described in the chapter "Cleaning".

To assemble the hand blender

WARNING! RISK OF INJURY!
► The blade is extremely sharp! Handle it with great care at all times.
Place the hand blender 5 on the motor unit 4 so that the arrow
■
to the symbol
unit 4 points to the symbol

Assembling the wire whisk

Press the whisk q into the whisk holder 0, until it firmly engages.
■
Place the so assembled whisk q onto the motor block 4 so that the arrow
■
at the symbol

Assembling the shredder

WARNING! RISK OF INJURY!
► The blade is extremely sharp! Handle it with great care at all times.
Place the bowl 8 on a dry, level surface.
■
Place the blade 7 carefully onto the holder in the bowl 8. Turn the
■
blade 7 a little while doing this, so that it slips onto the holder.
│ GB │ IE
■ 8
. Turn the hand blender 5 until the arrow
points to the symbol
.
You can use the liquidiser, which consists
of the blade 7, bowl 8 and bowl lid 6,
to chop herbs or also harder food. We
recommend using the liquidiser for a
maximum of 1 minute at a time and then
letting it cool down.
.
. Turn the motor block 4 until the arrow
points
on the motor
points
SSMS 600 E6