Philips DVD750VR Mode D'emploi page 13

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 13
1
DVD/VCR
AUDIO OUT
ANT-IN
Antenna/Cable
VIDEO OUT
ANT-OUT
TV Signal
1
Connect the antenna or Cable TV signal to the ANT -IN (Antenna In)
jack of your DVD/VCR.
2
Connect the supplied red and white audio cables to the red and
white DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red
and white AUDIO IN jacks on the TV. Match the cable colors to the jack
colors.
3
Connect an S-Video cable (not supplied) to the S-VIDEO OUT jack
on the DVD/VCR and to the S-VIDEO IN jack on the TV.
The S-Video connection only supplies video (picture) for the DVD Player of the
DVD/VCR.Therefore, in order to use the VCR features or view TV channels at the
DVD/VCR, you still need to either connect the RF coaxial cable between the ANT-OUT
jack of the DVD/VCR and the TV's Antenna In jack, or connect the yellow video cable.
To connect the supplied RF coaxial cable, see step 2 on page eight.To connect the
supplied yellow video cable, see step 3 on page 11.
4
Connect the power cords of the DVD/VCR and TV to a power outlet.
Turn on the TV and set it to the S-Video In channel for DVD Player
features.
If you are using the RF coaxial cable for VCR playback, choose channel 3 or 4
at the TV. If you are using the yellow video cable for VCR playback, choose the
Video In channel at your TV.To find the correct Video In channel, go to your
lowest TV channel and change channels downward until you see VCR or DVD
playback on the TV screen, or try channel 3 or 4 at the TV.
To help you find the right S-Video In channel, turn on the DVD/VCR. Press DVD to
put the DVD/VCR in DVD mode.With no Disc in the Player, a large DVD Video
logo will appear on the TV screen when you get the TV on the S-Video In channel.
5
You are ready to turn on the DVD/VCR. Go to page 17 before turn-
ing on the DVD/VCR.
6
After you complete the VCR setup as described on page 17, set
DOLBY DIGITAL to OFF in the DVD Player's Setup menu. Details are
on page 72. If you play a DVD when the settings are wrong, the sound will be
distorted or you may damage the TV speakers.
DVD/VCR to a TV that has an S-Video In jack
VCR
AUDIO IN
L L
R R
VIDEO IN
PROGRESSIVE
I
Hookups (cont'd) 13
DVD
S-VIDEO COMPONENT AUDIO DIGITAL
OUT VIDEO OUT OUT
AUDIO OUT
Y
P
b/
L
C
b
COAXIAL
P
r/
P
R
C r
2
3
AUDIO IN
LEFT
S-VIDEO IN
RIGHT