During Use - Silampos Easy Notice D'emploi

USING THE PRESSURE COOKER
PAG08

DURING USE

1. Place the pressure cooker on the connected heat source.
Please note The flame or the heat source should not exceed the bottom diameter of the pressure
cooker, to ensure greater energy efficiency and avoid damaging it.
Please note When using a ceramic and / or induction hob, make sure that the hob and bottom
are clean and dry to ensure your safety. Do not drag the parts so as not to scratch the heat source.
Please note that induction heating achieves extremely high temperatures
within a few seconds, therefore it requires extra caution and vigilance.
2. Select the pressure level you wish to use:
- Position (0.5 bar): for fast cooking;
- Position (0.9 bar): for super fast cooking.
3. Start counting cooking time after checking that the steam
is coming out in constantly via the functioning valve.
4. If during the use of the pressure cooker the pressure indicator fails to rise and/or the functioning
valve does not release steam, check whether the power of the heat source is strong enough. Should
this persist, depressurise the pressure cooker and check:
- Whether the quantity of liquid inside the pressure cooker is sufficient;
- Whether the pressure cooker is closed;
- Whether the functioning valve is clear;
- Whether the silicone sealing ring and the edge of the lid are in good conditions.
Please note During the first minutes of the cooking process, it is normal if the functioning valve
does not release the steam or do it intermittently.