PRIOR TO FIRST USE
PAG04
Prior to first use, remove all the labels from the pressure cooker. Wash it in hot water and washing-up
liquid. After washing, dry it with a cloth.
Lubricate the sealing ring with a bit of cooking oil to facilitate the opening and closing of the pressure
cooker. Make sure the steam release devices are clear.
Give the pressure cooker a test run using half a litre of water. Let it cook for 10 minutes until the
adjustment valve starts giving off steam.
Minimum Quantity:
You should not use the pressure cooker with a quantity of liquid of under 250 ml; you may damage
the pressure cooker and/or the heat source.
Maximum Quantity:
Do not fill the pressure cooker more than 2/3 of its capacity.
Please note if you exceed the limit of the capacity, the steam could be released through the adjust-
ment valve or through the edge of the lid. This could also occur if the heat source is too high.