rules and guidelines can be, but are not limited to local health and safety
regulations and the guidelines provided by professional associations.
• The machine manual must be available at the machine at all times.
• Read the operating instructions before you operate or maintain the machine.
• Make sure you have obtained, read and understood all instructions.
• Make sure you have obtained, read and understood any additional
instructions for special accessories for the machine.
• Carry out all work with and on the machine as described in the manual.
• Never start or operate a damaged machine.
• Always make sure that the machine is complete before operation. Operating
the machine with missing components can cause severe damage.
• Observe all signs with safety and danger notes. Replace warning and/or
safety signs immediately if they are missing or illegible.
• Do not perform any tasks for which you are not authorised. Only explicitly
qualified and authorised personnel may operate, maintain or repair the
machine.
• Personnel in training must be supervised at all times.
• Wear and use all needed personal protection equipment and safety gear
appropriate for the job.
• Keep a safe working environment.
• If necessary, make sure the machine complies with federal and local
standards before starting work.
• Do not use the machine for purposes other than those specified.
• All personnel working on or with the machine must be aware of possible
hazards.
• Never make any changes or additions to the machine, without obtaining
explicit written approval from the manufacturer/supplier. This also applies to
the installation and adjustment of safety devices.
Operation Manual
10
Dock Leveller ED