Philips PR3094 Manuel D'utilisation page 39

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Problem
Possible cause Solution
The 'no
There is no
connection
connection
symbol'
because the
is on the
TENS units
screen (see
are switched
chapter
off.
'Signals on
the device').
There is no
connection
because
battery of the
TENS units is
empty.
The TENS
units
overheated
inside. If this
is the case,
the treatment
status indicator
The remote
control is too
far from the
TENS units.
The TENS
units may be
broken.
Check if the TENS units are switched
on. The treatment status indicator
switched on and in standby. If the TENS
units are switched off, press the on/off
button to switch them on.
Charge the TENS units (see chapter
'Preparing for use').
Detach the TENS units and let them
cool down. As soon as they have
reattach them to the electrodes
and press the on/off button on the
TENS units to resume treatment. The
TENS units may become warm on
the outside during treatment, but the
temperature never becomes so high
that there is any risk of damage or
injury.
Bring the remote control closer to the
TENS units.
Contact the Philips Consumer Care
Centre.
ENGLISH
39

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Pr3093Wireless tensWireless tens pro

Table des Matières