RPB Z-LINK Mode D'emploi page 23

INSTALLATION
FIGURE 21.1
Remove the side pad from the cover that is
attached with velcro on the side of the helmet
™
that the COMMS-LINK
™
COMMS-LINK can be installed on either side
of the helmet.
FIGURE 2 1.3
Attach the side pad back onto the cover over
™ ear piece
the COMMS-LINK
is to be installed. The
.
FIGURE 21.2
Place the COMMS-LINK
attachment clip. Then attach the COMMS-
™
LINK Clip into the slots on the inside of the
cover.
™
ear piece into the
23