RPB Z-LINK Mode D'emploi page 14

SETUP AND USE
VISOR SEAL REPLACEMENT
FIGURE 5.1
The visor seal can be replaced by pulling it
out of the track around the visor opening.
STORAGE
Store in a cool dry place between -10°C to +45°C (14°F to 113°F) <90%rh
After cleaning:
FIGURE 5.3
14
CONTINUED
FIGURE 5.2
Starting from on of the top corners, insert the
new visor seal by pressing the edge into the
track all of the way around the visor opening.
After use:
FIGURE 5.4