Key Allocation Of X-Zone; Status Led Overview - Dräger X-zone 5500 Notice D'utilisation

Key allocation of X-zone

18 Key allocation of X-zone
The following key functions refer to the keys of the X-zone device.
Action
Pressing key once
Pressing and holding key for 3 sec
Pressing and holding and
Pressing key once
Pressing and holding key for 3 sec
3 Press the key 3 times
3 sec. press of and 3 x
19

Status LED overview

Battery LED
(Shows the battery status and the status of the external power supply.)
Colour LED status
off
red
red/green
green
red
red
red
red
red/green
green
green
Communication LED
(Indicates the connection status if several devices are coupled via wireless connection or communication cable.)
Colour LED status
green
green
red
red
68
Meaning
Acknowledges device defects and pre-alarms.
Switch from OFF to STANDBY mode or switching from STANDBY to ON mode.
key for 3 sec Switches to OFF mode.
On the main device: Expand group/End search run.
On the main device: Reduce group size.
On the group device: Deletes the grouping information.
On the main device: Activate group monitoring.
On the main device: Provisionally disable group monitoring.
key
Device mode
off OFF mode
on ON/STANDBY mode
ON/STANDBY mode
OFF mode
ON/STANDBY mode
in charging cradle and with
external power supply
Group monitoring
off/device not grouped
on
activated
provisionally disabled
Device not grouped
on
activated
provisionally disabled
Meaning
Device is switched off.
Charge less than 33 %.
Charge between 33 % and 66 %.
Charge greater than 66 %.
Battery pre-alarm
Battery main alarm; X-zone switches off after 10 sec.
Attempt to switch on in OFF mode when the battery is empty (on
for 10 s).
X-zone device is charging, charge less than 33 %.
X-zone device is charging, charge between 33 % and 66 %.
X-zone device is charging, charge greater than 66 %.
X-zone device is fully charged.
Meaning
At least 1 other X-zone device coupled via wireless connection or
cable detected.
On the main device: Device connected to group.
On the group device: Device connected to main device.
X-zone device connected to group.
No additional X-zone device coupled via wireless or cable
connection detected.
Alarm on main device: At least one device in the group is not
connected.
Alarm on group device: No connection to main device.
On the main device: At least one device in the group is not
connected.
On the group device: No connection to main device.
Dräger X-zone 5500 / 5800