Télécharger Imprimer la page

Publicité

Liens rapides

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the CLB! Please read the manual thoroughly before bringing this device into service. If the device
was damaged in transit, don't install or use it and contact your dealer. Your set should include the following:
• 1 or 3 colour changing balls (depending on the model number)
• 1 x charging base for 1 or 3 balls
• 1 x 7.5VDC / 300mA adapter for the CLB1 or 7.5VDC / 350mA adapter for the CLB3
• This manual
2. Use
Unpack everything carefully. The ball's battery will probably be depleted. Insert the AC/DC adapter into the
recharging base and plug it into the mains. Note that none of the indicator lights will be lit. Place the ball correctly on
its pad. The LED indicator next to the ball will light up red. When fully charged, the LED will turn green and the ball
can be removed from its pad and placed anywhere in your house. It will function for about 8 hours continuously.
On the bottom of the ball is a small switch that enables the different functions:
• Push the button for a few seconds until it switches on.
• When the ball is on, press the button repeatedly to go through the programmed sequence: green, blue, red,
purple, white, constant changing colour, slowly glowing changing colour.
• To switch it off, keep the button pressed for a few seconds until the ball switches off.
IMPORTANT: Do not leave the orbs to recharge for more than 24 hours continuously!
3. Technical Specifications
Ball diameter
Base size
Stand-alone time
Charging time
Adapter
The information in this manual is subject to change without prior notice.
CLB1 / CLB3 –SFEERVOLLE GLOEIBOL(LEN)
1. Inleiding en kenmerken
Aan alle ingezetenen van de Europese Unie
Belangrijke milieu-informatie betreffende dit product
Dit symbool op het toestel of de verpakking geeft aan dat, als het na zijn levenscyclus wordt weggeworpen,
dit toestel schade kan toebrengen aan het milieu.
Gooi dit toestel (en eventuele batterijen) niet bij het gewone huishoudelijke afval; het moet bij een
gespecialiseerd bedrijf terechtkomen voor recyclage.
U moet dit toestel naar uw verdeler of naar een lokaal recyclagepunt brengen.
Respecteer de plaatselijke milieuwetgeving.
Heeft u vragen, contacteer dan de plaatselijke autoriteiten inzake verwijdering.
CLB1 / CLB3
CLB1 / CLB3 – COLOUR-CHANGING ORB(S)
83mm
95 x 95 x 25mm (CLB1) or 190 x 190 x 25mm (CLB3)
up to 8 hours
approx. 9 hours
7.5VDC / 300mA (CLB1) or 7.5VDC / 350mA (CLB3) (included)
1
VELLEMAN

Publicité

loading

Sommaire des Matières pour Velleman CLB1

  • Page 1 • 1 or 3 colour changing balls (depending on the model number) • 1 x charging base for 1 or 3 balls • 1 x 7.5VDC / 300mA adapter for the CLB1 or 7.5VDC / 350mA adapter for the CLB3 • This manual 2.
  • Page 2: Technische Specificaties

    • 1 of 3 van kleur veranderende bollen (afhankelijk van de productcode) • 1 x laadstation voor 1 of 3 bollen • 1 x 7.5VDC / 300mA adapter voor de CLB1 of 7.5VDC / 350mA adapter voor de CLB3 • Deze handleiding 2.
  • Page 3: Spécifications Techniques

    • 1 ó 3 bolas multicolores (según el código del producto) • 1 estación de carga para 1 ó 3 bolas • 1 adaptador 7.5VCC / 300mA para la CLB1 ó 7.5VCC / 350mA para la CLB3 • Este manual del usuario 2.
  • Page 4 Ihren Händler. Folgende Teile sollten mitgeliefert sein: • 1 oder 3 Farbwechsel-Kugel(n) (abhängig von der Artikelnummer) • 1 Ladestation für 1 oder 3 Kugel(n) • 1 Adapter 7.5VDC / 300mA für die CLB1 oder 7.5VDC / 350mA für die CLB3 • Diese Bedienungsanleitung 2. Gebrauch Packen Sie alles vorsichtig aus.
  • Page 5: Technische Daten

    95 x 95 x 25mm (CLB1) Abmessungen der Ladestation 190 x 190 x 25mm (CLB3) Stand-alone Zeit bis zu 8 Stunden Ladezeit ± 9 Stunden 7.5VDC / 300mA (CLB1) oder 7.5VDC / 350mA (CLB3) (mitgeliefert). Adapter Änderungen vorbehalten. CLB1 / CLB3 VELLEMAN...

Ce manuel est également adapté pour:

Clb3