Télécharger Imprimer la page
Canon CanoScan LiDE 210 Guide De Démarrage Rapide

Canon CanoScan LiDE 210 Guide De Démarrage Rapide

Publicité

Liens rapides

Quick Start Guide
Package Contents
1
Scanner
2
USB Cable
3
Stand
4
Setup CD-ROM
5
Quick Start Guide (this document)
Installing the Software
• Do NOT connect the scanner to a computer before installing the software. If you connect the scanner,
unplug the USB cable from the computer. When the Found New Hardware screen appears, unplug the
USB cable from the computer and click Cancel. The screen may close automatically when the USB cable
is unplugged.
• Quit all running applications before installation.
• For Windows: Uninstall software bundled with the Canon scanner before upgrading from Windows Vista to
Windows 7, then, install the bundled software again.
• For Macintosh: After upgrading from Mac OS X v.10.5 or lower to Mac OS X v.10.6, install software
bundled with the Canon scanner.
• Log in as an administrator to install the software.
• Do not switch users during the installation process.
1
Place the Setup CD-ROM in the drive.
For Macintosh: Double-click the Setup icon. Enter the administrator ID and password on the
authentication dialog box.
For Windows XP and Macintosh, skip step 2 and go to step 3.
2
For Windows 7/Windows Vista, when the AutoPlay dialog box (*1) appears, run the setup
program, and then click Yes or Continue to proceed when the User Account Control
dialog box (*2) appears.
3
If prompted, select your language and place of residence, and then click Next.
In some countries, these dialog boxes will not appear.
4
Click Easy Install on the main menu (*3).
5
Click Install to start installation.
Carefully read the License Agreement, and then click Yes to proceed.
For Macintosh, skip step 6 and go to step 7.
6
For Windows, carefully read the Please Allow All Install Wizard Processes screen, and
then click Next.
7
Follow the on-screen instructions to perform the installation.
8
When the Extended Survey Program screen appears, confirm it.
If you can agree, click Agree.
9
When the installation is complete, follow the on-screen instructions.
For Windows: Click Exit.
For Macintosh: Click Exit. If you click OK on the Canon Solution Menu EX dialog box, Solution Menu
EX will appear.
<Solution Menu EX>
You can select either MP Navigator EX or "On-Screen Manual".
For Windows: When you start up your computer next time, Solution Menu EX will appear automatically.
When you restart your computer, perform the operation of "Preparing the Scanner" in advance.
If only Help & Settings menu is displayed in Solution Menu EX, connect the scanner to your computer and
wait a while, and then refer to the Solution Menu EX online help and set up the scanner.
For Macintosh: If the Canon Solution Menu EX icon is not found in the Dock, you can start Solution Menu
EX from "About Solution Menu EX" in "On-Screen Manual". To add the Canon Solution Menu EX icon to
the Dock, refer to the Solution Menu EX online help.
Preparing the Scanner
1
Slide the lock switch on the bottom of the scanner toward the unlock mark (
• Always lock the scanner when carrying or transporting it.
2
Connect the scanner to your computer with the supplied USB cable.
• Only use the USB cable provided with the scanner. Use of other cables may lead to a malfunction.
• Do not touch the metallic parts of the USB connector.
• The scanner does not have a power switch. The power is activated as soon as the computer is turned
on.
• When the scanner is connected to the USB 1.1 port and This device can perform faster or HI-
SPEED USB Device Plugged into non-HI-SPEED USB Hub message appears, ignore the
message. The scanner operates in this condition without problems.
Try Scanning
1
Place a color photo document with the side to be scanned facing down on the platen glass
at least 1 cm (0.4 in.) away from the edges of the platen glass, and then close the document
cover.
2
Start MP Navigator EX.
For Windows: Double-click the Canon Solution Menu EX icon, and then click the MP Navigator EX
4.0 icon under Start Application menu.
For Macintosh: Click the Canon Solution Menu EX icon in the Dock, and then click the MP Navigator
EX icon under Start Application menu.
3
Click Photos/Documents (Platen).
4
Select Color Photo in Document Type.
5
Click Scan to start scanning.
• Do not move the scanner while it is operating.
• Do not see the light source directly during a scan job.
6
When prompted that the scanning completed, click Exit.
7
Click Save to save the images and close MP Navigator EX (*1).
Using the Scanner Buttons
SCAN START Button
Saves the scanned image as a PDF file.
Ends the operation and saves the scanned
image in a PDF file.
AUTO SCAN Button
Discriminates the document type
Prints (copies) the scanned image with a
automatically, then scans and saves it with
printer.
appropriate settings.
E-MAIL Button
Attaches the scanned image to a new e-mail
message.
• For Macintosh:
If you have not restarted the computer since installing the software, you need to restart the computer
before using the scanner buttons first.
Refer to "On-Screen Manual" for further information about ScanGear, MP Navigator EX, Scanner Buttons,
and Troubleshooting. To start "On-Screen Manual", double-click the on-screen manual icon on the desktop.
*In this guide, Windows 7 operating system Home Premium screenshots are used to illustrate explanations
common to all operating systems.
Additionally, the every edition of Windows 7 is referred to as Windows 7, the every edition of Windows
Vista operating system as Windows Vista, and Windows XP Home Edition/Professional as Windows XP.
QT5-3140-V01
XXXXXXXX
*1
*2
*3
).
*1
FINISH Button
COPY Button
©CANON INC. 2010
PRINTED IN VIETNAM
IMPRIME AU VIETNAM
*1
*2
*3
Bottom
Bas
Top
Haut
*1
English / FRANÇAIS
ESPAÑOL / PORT DO BRASIL
Guide de démarrage rapide
Contenu de l'emballage
1
Scanner
2
Câble USB
3
Support
4
CD-ROM d'installation
5
Guide de démarrage rapide (ce document)
Installation des logiciels
• Ne connectez PAS le scanner à un ordinateur avant d'installer les logiciels. Si vous connectez le scanner,
débranchez le câble USB de l'ordinateur. Lorsque l'écran Nouveau matériel détecté (Found New
Hardware) apparaît, débranchez le câble USB de l'ordinateur, puis cliquez sur Annuler (Cancel). L'écran
peut se fermer automatiquement dès que vous débranchez le câble USB.
• Quittez toutes les applications en cours avant de procéder à l'installation.
• Sous Windows : désinstallez les logiciels fournis avec le scanner Canon avant d'effectuer une mise à
niveau de Windows Vista vers Windows 7, puis installez à nouveau les logiciels fournis.
• Sous Macintosh : Après avoir effectué une mise à niveau de Mac OS X v.10.5 ou d'une version antérieure
vers Mac OS X v.10.6, installez les logiciels fournis avec le scanner Canon.
• Ouvrez une session en tant qu'administrateur pour installer les logiciels.
• Ne changez pas d'utilisateur au cours de l'installation.
1
Insérez le CD-ROM d'installation dans le lecteur.
Sous Macintosh : double-cliquez sur l'icône Setup. Entrez l'ID d'administrateur et le mot de passe
dans la boîte de dialogue d'authentification.
Sous Windows XP et Macintosh, ignorez l'étape 2 et passez à l'étape 3.
2
Sous Windows 7/Windows Vista, lorsque la boîte de dialogue Exécution automatique
(AutoPlay) (*1) apparaît, lancez le programme d'installation, puis cliquez sur Oui (Yes) ou
Continuer (Continue) pour poursuivre lorsque la boîte de dialogue Contrôle de compte
d'utilisateur (User Account Control) (*2) apparaît.
3
Si un message vous y invite, sélectionnez votre langue et votre lieu de résidence,
puis cliquez sur Suivant (Next).
Dans certains pays, ces boîtes de dialogue n'apparaissent pas.
4
Cliquez sur Installation rapide (Easy Install) dans le menu principal (*3).
5
Cliquez sur Installer (Install) pour lancer l'installation.
Lisez attentivement le contrat de licence, puis cliquez sur Oui (Yes) pour continuer.
Sous Macintosh, ignorez l'étape 6 et passez à l'étape 7.
6
Sous Windows, lisez attentivement l'écran Autorisez tous les processus de l'assistant
d'installation (Please Allow All Install Wizard Processes), puis cliquez sur Suivant
(Next).
7
Suivez les instructions qui s'affichent afin de procéder à l'installation.
8
Confirmez l'écran Extended Survey Program lorsqu'il apparaît.
Si vous acceptez, cliquez sur J'accepte (Agree).
9
Lorsque l'installation est terminée, suivez les instructions qui s'affichent à l'écran.
Sous Windows : cliquez sur Quitter (Exit).
Sous Macintosh : cliquez sur Quitter (Exit). Si vous cliquez sur OK dans la boîte de dialogue Canon
Solution Menu EX, Solution Menu EX apparaît.
<Solution Menu EX>
Vous pouvez sélectionner MP Navigator EX ou « Manuel en ligne ».
Sous Windows : au prochain démarrage de votre ordinateur, Solution Menu EX apparaîtra
automatiquement. Lorsque vous redémarrez votre ordinateur, effectuez préalablement l'opération décrite
sous « Préparation du scanner ».
Si seul le menu Aide et paramètres (Help & Settings) est affiché dans Solution Menu EX, branchez le
scanner à votre ordinateur, patientez, puis reportez-vous à l'aide en ligne de Solution Menu EX pour
configurer le scanner.
Sous Macintosh : si l'icône Canon Solution Menu EX n'apparaît pas dans le Dock, vous pouvez démarrer
Solution Menu EX à partir de « À propos de Solution Menu EX » dans « Manuel en ligne ». Pour ajouter
Canon Solution Menu EX au Dock, reportez-vous à l'aide en ligne de Solution Menu EX.
Préparation du scanner
1
Faites glisser le bouton de verrouillage en bas du scanner vers le repère
de déverrouillage (
).
• Verrouillez toujours le scanner lors de son transport.
2
Raccordez le scanner à l'ordinateur au moyen du câble USB fourni.
• Utilisez uniquement le câble USB fourni avec le scanner. L'utilisation d'autres câbles peut provoquer
un dysfonctionnement.
• Ne touchez pas les pièces métalliques du connecteur USB.
• Le scanner n'a pas d'interrupteur. L'alimentation est activée dès que l'ordinateur est mis sous tension.
• Si le scanner est raccordé au port USB 1.1 et que le message Cet appareil peut fonctionner plus
rapidement (This device can perform faster) ou Périphérique USB à haut débit connecté à un
concentrateur USB à débit réduit (HI-SPEED USB Device Plugged into non-HI-SPEED USB
Hub) s'affiche, ignorez-le. Cette situation ne compromet pas le bon fonctionnement du scanner.
Essai de numérisation
1
Placez une photo en couleur sur la vitre du scanner, face à numériser vers le bas sur la vitre
d'exposition, à au moins 1 cm (0,4 pouce) des bords de celle-ci, puis fermez le couvercle
du scanner.
2
Démarrez MP Navigator EX.
Sous Windows : cliquez deux fois sur l'icône Canon Solution Menu EX, puis cliquez sur l'icône
MP Navigator EX 4.0 dans le menu Démarrer application (Start Application).
Sous Macintosh : cliquez sur l'icône Canon Solution Menu EX dans le Dock, puis sur l'icône
MP Navigator EX dans le menu Démarrer application (Start Application).
3
Cliquez sur Photos/Documents (vitre) (Photos/Documents (Platen)).
4
Sélectionnez Photo couleur (Color Photo) dans Type de document (Document Type).
5
Cliquez sur Numériser (Scan) pour lancer la numérisation.
• Ne déplacez pas le scanner pendant son fonctionnement.
• Ne regardez pas directement la source lumineuse pendant une tâche de numérisation.
6
Lorsque le message de fin de numérisation s'affiche, cliquez sur Quitter (Exit).
7
Cliquez sur Enregistrer (Save) pour enregistrer les images et fermer MP Navigator EX (*1).
Utilisation des boutons du scanner
Bouton DÉMARRER
NUMÉRISATION (SCAN START)
Met fin à l'opération et enregistre l'image
numérisée dans un fichier PDF.
Enregistre une image numérisée sous
un fichier PDF.
Bouton AUTO SCAN
Imprime (copie) l'image numérisée à l'aide
d'une imprimante.
Détermine automatiquement le type du
document, puis le numérise et l'enregistre
selon les paramètres appropriés.
Bouton E-MAIL
Joint l'image numérisée à un nouveau
message électronique.
• Sous Macintosh :
Si vous n'avez pas redémarré l'ordinateur depuis que vous avez installé le logiciel, vous devez
commencer par redémarrer l'ordinateur avant d'utiliser les boutons du scanner.
Reportez-vous au « Manuel en ligne » pour plus d'informations sur ScanGear, MP Navigator EX, les
boutons du scanner et le dépannage. Pour démarrer le « Manuel en ligne », double-cliquez sur l'icône du
manuel en ligne sur le bureau.
*Dans ce guide, des captures d'écran provenant de Windows 7 operating system Home Premium sont
utilisées pour illustrer les explications communes à tous les systèmes d'exploitation.
De plus, les différentes éditions du système d'exploitation Windows 7 sont dénommées Windows 7,
les différentes éditions de Windows Vista sont appelées Windows Vista et Windows XP Édition Familiale/
Professionnel est dénommé Windows XP.
Bouton TERMINER (FINISH)
Bouton COPIE (COPY)

Publicité

loading

Sommaire des Matières pour Canon CanoScan LiDE 210

  • Page 1 Solution Menu EX online help and set up the scanner. scanner à votre ordinateur, patientez, puis reportez-vous à l'aide en ligne de Solution Menu EX pour For Macintosh: If the Canon Solution Menu EX icon is not found in the Dock, you can start Solution Menu configurer le scanner.
  • Page 2 • Para Windows: desinstale el software que acompaña al escáner Canon antes de actualizar de Windows • Para Windows: desinstale o software fornecido com o scanner da Canon antes de fazer a atualização do Vista a Windows 7; a continuación, vuelva a instalar este software.