Becker Centronic SunWindControl SWC52 Notice De Montage Et D'utilisation page 41

PROGRAM
(Switching timest or blocking timest)
1. Press the MENU button.
2. To select the PROGAM menu press the + button until PROGAM appears.
Note
The FUNCTION menu can be used to choose between switching times
and blocking times.
Programming will not take effect if the sign: --:-- is showing on your
display. (--:-- is located between 23.59 and 00:00)
3. Press OK to confirm. SWITCHING TIME t/BLOCKING TIME t appears.
4. Now set the desired SWITCHING TIME t/BLOCKING TIME t and the
SWITCHING TIME s/ BLOCKING TIME s using the +/- buttons. Press OK to
confirm.
5. Press the MENU button to return to operating mode.
de
en
fr
nl
41