Scheppach AC10/8V Manuel D’instructions D’origine page 39

9.3 Using the adapter set (Fig. 4-7)
The adapter set enables the following additional capabilities:
• Using the ball needle to inflate balls (20).
• The Dunlop valve (21) enables bicycle tyres and car tyres to be inflated.
• Pools, air mattresses, boats or similar swimming accessories can also be filled using the additional conical adapter
(19).
ATTENTION! When inflating objects with an air pressure of 10 Psi or less, always inflate in short bursts. After each
burst, squeeze the object or use a calibrating measurement device to check whether the required air pressure has
been reached.
ATTENTION! The air pressure required to inflate most sports balls is too low to be read out accurately on the device's
measurement indicator.
10. Operation
m Attention!
Always make sure the product is fully assembled before commissioning!
10.1 Switching on/off (Fig. 1)
• Press and hold the On/Off switch (11) to switch on.
• Press the operating mode button (10) for a short time to switch to the required inflation mode.
• Press and hold the operating mode button (10) for 3 seconds until the required measurement unit (bar, kPa, PSI, kg/
cm ) is shown on the display.
2
• Press and hold the On/Off switch (11) to switch the device off.
10.2 Selecting inflation mode (Fig. 2)
You can choose from four pre-set pressure values: Car, motorcycle, bicycle and ball.
You can also select manual mode and define the pressure yourself.
Press the operating mode button (10) until the required symbol is shown on the display.
www.scheppach.com · service@scheppach.com