Setting The Time And Date - Dräger CMS Notice D'utilisation

Preparing for use
Save time format:
1. Press and hold side button.
Select date format:
2. Briefly press side button several times
until the following display appears:
Setup CMS
Date format
3. Press and hold side button until the
following display appears:
Date format
DD.MM.YY
D = Day
M = Month
Y = Year
The mode to be set is underlined.
4. Briefly press side button several times to
select the required date format.
Save date format:
Press and hold side button until the

following display appears:
Setup CMS
Date format
The other Setup
DataRecorder Read and Delete functions
can be selected by repeatedly pressing the
side button.
Exit Setup mode:
Move sliding switch to position 0.

6.6

Setting the time and date

1. Prior to first commissioning and after the
battery replacement, set the time and
date.
2. Move sliding switch from position 0 to
position 1. Then immediately press and
hold side button until the following
display appears:
Setup CMS
Read DataRec
Dräger CMS Analyzer
options and the
Setup CMS
Date format
Date format
D D . M M . Y Y
Setup CMS
Date format
Setup CMS
Read Data Rec
0 0
1 1
2 2
3 3
02022837_4en.eps
02122837_4en.eps
02022837_4en.eps
10022837_4en.eps
45