SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN)
TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS
1.1
• Align the hole in the bottom of the top pole (ALH) with
the slot in the top of the middle pole (ALF).
• Aligner le trou dans la partie inférieure du poteau
supérieur (ALH) avec la fente dans la partie supérieure
du poteau central (ALF).
• Alinear el agujero en la parte inferior del poste
superior (ALH) con la ranura en la parte superior del
poste intermedio (ALF).
• The middle pole is the pole with the warning
sticker.
• Le poteau central est le poteau avec
l'autocollant d'avertissement.
• El poste intermedio es el poste con el auto-
adhesivo de advertencia.
ADS (x1)
CIH (x1)
1.2
ALH
ALF
7
• Secure the top pole to the middle pole with the
hardware indicated.
• Bien attacher le poteau supérieur au poteau
central à l'aide de la quincaillerie indiquée.
• Sujetar bien el post superior al poste intermedio
usando el herraje indicado.
ALH
ALF
• The screw should be fl ush with the pole, but will spin freely
once inserted.
• La vis sera au ras du poteau, mais elle tournera librement
une fois insérée.
• El tornillo estará a ras del poste, mas girará libremente un
vez insertado.
CIH
ADS