Publicité
9
STEP 3
Hook the unit to the mounting bracket and let the
unit hang from the mounting bracket.
Run the electrical power supply cable in the flexible
conduit and connect to the wiring compartment
via the knock-out at back side of the unit.
Make the connections properly, with connectors
that
grounding wirings. After making the connections,
arrange the pigtail leads of the unit and power
supply wires in the wiring compartment. Secure the
unit to the bracketwith screws.
STEP 4
Replace the housing and secure with
screws.
MODEL:PH-945
e r a
u s
a t i
e l b
r o f
e h t
o c
d n
c u
r o t
s
e z i
, including
Publicité
