Publicité
EN
6. Zendure App Setup
1. The Zendure app is continually being improved and may change over time. If there are any differences between the
instructions in this guide and in the app, follow the in-app instructions.
2. Privacy Policy: By using Zendure Products, Applications and Services, you consent to the Zendure Terms of Use and
Privacy Policy, which you can access via the "About" section of the "User" page in the Zendure app.
7. Off-Grid Power Socket Usage Instructions
The off-grid power socket provides electricity independently from the main power grid, using energy stored in
the battery system. It is ideal for backup power, remote areas, or situations where grid access is unavailable.
The off-grid socket function is disabled by default and can be enabled through the Zendure App. Once
activated, simply plug in your device to use the socket. After use, please ensure to turn off the function in the
App.
1. Ensure Sufficient Battery Power: Before using the off-grid socket, check that the battery has enough
charge to support the connected devices.
2. Maximum Output Power Limit: The off-grid socket has a maximum output power of 2400W. Do not
connect devices that exceed this limit to avoid triggering the protection mechanism, system shutdown, or
safety risks.
3. Waterproofing of Off-Grid Socket: The socket is not waterproof during use, nor when the waterproof cover
is not securely closed. If using the off-grid socket, it is recommended to install the inverter indoors. For
outdoor installations, only use the socket on clear days, and promptly close the waterproof cover after use
to prevent water ingress, device damage, electric shock, or fire hazards.
8. Remove the Inverter
8.1 Remove the Inverter from Socket
1. Disconnect the AC power cable. Please disconnect the AC cable from the AC socket
end first, then press the AC connector on the inverter to pull it out with the wrench.
2. Press the button on the inverter for 6 seconds to power it off.
3. Release the brackets fixed between the devices and the wall.
4. Remove the inverter from the batteries.
8.2 Remove the Inverter from the Circuit Breaker
Risk of Electric Shock:
!
The devices must be removed by a qualified electrician with caution.
Before disconnecting any wires, ensure that the circuit is de-energized.
1. Put on insulating gloves (Note: Not included, to be provided by electrician/user)
2. Turn off the main power supply first. You can verify power is off using a voltage tester.
3. Carefully disconnect wires from the breaker.
4. Double-check all connections are secure, Slowly restore power by turning on the main circuit breaker.
Monitor for any unusual sounds or behavior.
5. Press the AC connector on the inverter to pull it out. with wrench.
6. Release the brackets fixed between the devcies and the wall.
7. Remove the inverter from the batteries.
The Zendure app allows users to monitor and manage power systems, offering real-
time power monitoring, historical records, charge/discharge scheduling, and more.
1. To download the Zendure app, scan the QR code or search "Zendure" in the Apple
App Store® or Google Play Store.
2. Open the Zendure app. Log In or sign up.
3. Follow the in-app instructions to add your SolarFlow 2400 AC Coupled Inverter.
4. Please update the firmware to the latest version in the settings before using.
12
Publicité
