EN
knowledge, if they are
supervised or receive
instructions concerning the
safe use of the product and
understand the risks involved
with its use. Do not allow
children to play with the
product. Do not allow
children to clean or maintain
the product without
supervision.
• Note that the heater
element will still be hot after
the product is switched off –
risk of burn injury.
• Avoid skin contact. Avoid all
contact with water and
substances or liquids
containing solvent.
IMPORTANT:
• It is not possible to remove
spots of hotmelt glue from
clothes.
• Wear safety glasses.
• Allow the product to cool
upright in its holder after
use.
• Pull out the plug during
long pauses in the work.
2
SYMBOLS
Read the instructions.
Approved in accordance with the
relevant directives.
Safety class II.
Recycle as electrical waste.
TECHNICAL DATA
Rated voltage
Output
Heating effect
Temperature range
Safety class
Protection rating
Glue stick
Cord length
DESCRIPTION
PARTS
6.
Charge opening
7.
Power cord
8.
Trigger
9.
Support
10. Nozzle
FIG. 4
230 V ~ 50 Hz
20 W
6 – 12 g/min
170 – 190°C
II
IP20
Ø 7.2 mm
1.3 m