Publicité
NOTE
If you place the appliance with the
door hinge side against a wall, you
may have to allow additional space so
the door can be open wider.
3. DOOR REMOVAL AND REVERSAL
3.1 Door removal/reversal
Tools required: Phillips™ and flat head
screwdrivers, hexagonal spanner.
Two people should assemble the
appliance.
• Ensure the appliance is unplugged and
empty.
• To take the door off, tilt the appliance
backwards. Rest it on something solid
so it will not slip during the door
reversing process.
• Save all parts to reinstall the door.
• To prevent damaging the coolant
system, do not lay the appliance flat.
1. Remove 2 screws at rear side of top
cover.
2. Remove the top cover and thermostat
knob. Place it aside.
6
ENGLISH
2.2 Leveling
When positioning the appliance, ensure
that it is level, with all bottom corners
resting firmly on a solid floor. You can
adjust this using the two leveling feet
located at the front bottom of the
appliance.
1
3. Unscrew top hinge. Remove the lid
and place it on a soft pad to avoid
scratching.
4. Unscrew bottom hinge. Remove
adjustable feet from both sides.
2
1
Publicité
